A Review on Emerging Granule-Based 3D Printing Technology
Subject Areas :Atefeh Nejadebrahim 1 , Zeinab Akbarian 2
1 -
2 - Polymer Engineering Department, Qom University of Technology, P.O. Box: 1519-37195, Qom, Iran
Keywords: 3D Printing, Material Extrusion Printing, Fused Granular Fabrication, Biocompatible Polymers,
Abstract :
Fused granular fabrication, as an emerging extrusion-based additive manufacturing technology, has gained increasing attention as a promising alternative to conventional filament-based systems due to its direct utilization of polymer pellets as feedstock. Eliminating the intermediate filament production step not only reduces material and processing costs but also enhances flexibility in material selection and enables the development of diverse polymeric and composite formulations. These advantages position pellet-based printing as a suitable approach for manufacturing engineering components, biocompatible structures, and large-scale applications.
The performance of pellet-fed systems is strongly influenced by the intrinsic properties of the feedstock and the processing parameters. In polymer composites, filler characteristics—including type, particle size, morphology, aspect ratio, and dispersion quality within the polymer matrix—play a critical role in determining melt rheological behavior, extrusion stability, interlayer adhesion, dimensional accuracy, and the final mechanical and functional properties of printed parts. Therefore, successful design of printable formulations requires a comprehensive understanding of the interactions among material structure, filler characteristics, and processing conditions.
This review article discusses the fundamentals, advantages, challenges, and applications of granule-based 3D printing and provides a technical and economic comparison with filament-based additive manufacturing. Furthermore, the role of biocompatible polymers and composite systems, the influence of filler characteristics on printability and part performance, and the major challenges in advancing this technology are examined. Finally, future research directions aimed at improving print quality, developing advanced materials, and expanding industrial and biomedical applications are outlined.
1. Pagac, M., Hajnys, J., Ma, Q. P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021). A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3D printing. Polymers, 13(4), 598.
2. Prabhakar, M., Manoj, A. K., Saravanan, A., Haiter Lenin, A., Mayandi, K., & Sethu Ramalingam, P. (2021). A short review on 3D printing methods, process parameters and materials. Materials Today: Proceedings, 45, 6108–6114.
3. Vora, H. D., & Sanyal, S. (2020). A comprehensive review: Metrology in additive manufacturing and 3D printing technology. Progress in Additive Manufacturing, 5(4), 319–353.
4. Kumar, A., Singh, A. P., Singh, S. K., Singh, R., & Ahuja, I. P. S. (2023). Application of 3D printing for engineering and bio-medicals: Recent trends and development. International Journal on Interactive Design and Manufacturing (IJIDeM), 17(5), 2127–2136.
5. Aznarte Garcia, E., Qureshi, A. J., & Ayranci, C. (2018). A study on material-process interaction and optimization for VAT-photopolymerization processes. Rapid Prototyping Journal, 24(9), 1479–1485.
6. Nejadebrahim, A., Ebrahimi, M., Allonas, X., Croutxé-Barghorn, C., Ley, C., & Métral, B. (2019). A new safranin-based three-component photoinitiating system for high resolution and low shrinkage printed parts via digital light processing. RSC Advances, 9(68), 39709–39720.
7. Ahmadi, Z., Najafi, M., Nejadebrahim, A., & Ataeefard, M. (2025). Investigation of printing parameters on dimensional accuracy of geometrically complex objects in FDM 3D printing. Progress in Color, Colorants and Coatings, 18(4), 493–502.
8. Patti, A. (2024). Challenges to improve extrusion‐based additive manufacturing process of thermoplastics toward sustainable development. Macromolecular Rapid Communications, 45(17), 2400249.
9. Pignatelli, F., & Percoco, G. (2022). An application-and market-oriented review on large format additive manufacturing, focusing on polymer pellet-based 3D printing. Progress in Additive Manufacturing, 7(6), 1363–1377.
10. Justino Netto, J. M., Idogava, H. T., Frezzatto Santos, L. E., Silveira, Z. D. C., Romio, P., & Alves, J. L. (2021). Screw-assisted 3D printing with granulated materials: A systematic review. The International Journal of Advanced Manufacturing Technology, 115(9), 2711–2727.
11. Pagés-Llobet, A., Espinach, F. X., Julián, F., Oliver-Ortega, H., & Méndez, J. A. (2023). Effect of extruder type in the interface of PLA layers in FDM printers: Filament extruder versus direct pellet extruder. Polymers, 15(9), 2019.
12. McDonagh, T., Belton, P., & Qi, S. (2022). Direct granule feeding of thermal droplet deposition 3D printing of porous pharmaceutical solid dosage forms free of plasticisers. Pharmaceutical Research, 39(3), 599–610.
13. Janning, K., König, S., Herbst, L., Nießing, B., & Schmitt, R. H. (2025). Development of an end-to-end automated production concept for extrusion-based additive manufacturing of personalized medical scaffolds. Frontiers in Manufacturing Technology, 5, 1572842.
14. Patel, A., & Taufik, M. (2024). Extrusion-based technology in additive manufacturing: A comprehensive review. Arabian Journal for Science and Engineering, 49(2), 1309–1342.
15. Gupta, A. K., Krishnanand, & Taufik, M. (2025). Effect of process parameters on performances measured in filament and pellets-based additively manufactured parts. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239(1), 489–512.
16. Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020). Polymers for extrusion-based 3D printing of pharmaceuticals: A holistic materials–process perspective. Pharmaceutics, 12(2), 124.
17. Aftab, M., Ikram, S., Ullah, M., Khan, N., Naeem, M., Khan, M. A., & Qizi, O. K. A. (2025). Recent trends and future directions in 3D printing of biocompatible polymers. Journal of Manufacturing and Materials Processing, 9(4), 129.
18. Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017). Printability of candidate biomaterials for extrusion-based 3D printing: State‐of‐the‐art. Advanced Healthcare Materials, 6(16), 1700264.
19. Tümer, E. H., & Erbil, H. Y. (2021). Extrusion-based 3D printing applications of PLA composites: A review. Coatings, 11(4), 390.
20. Arockiam, A. J., Subramanian, K., Padmanabhan, R. G., Selvaraj, R., Bagal, D. K., & Rajesh, S. (2022). A review on PLA with different fillers used as a filament in 3D printing. Materials Today: Proceedings, 50, 2057–2064.
21. Wang, X., Huang, L., Li, Y., Wang, Y., Lu, X., Wei, Z., & Liu, Y. (2024). Research progress in polylactic acid processing for 3D printing. Journal of Manufacturing Processes, 112, 161–178.
22. Yousefi, M. A., Rahmatabadi, D., Baniassadi, M., Bodaghi, M., & Baghani, M. (2025). 4D printing of multifunctional and biodegradable PLA‐PBAT‐Fe3O4 nanocomposites with supreme mechanical and shape memory properties. Macromolecular Rapid Communications, 46(2), 2400661.
23. Liu, H., Gong, K., Portela, A., Cao, Z., Dunbar, R., & Chen, Y. (2023). Granule-based material extrusion is comparable to filament-based material extrusion in terms of mechanical performances of printed PLA parts: A comprehensive investigation. Additive Manufacturing, 75, 103744.
24. Rahmani, K., Ravanbod, S., Dezaki, M. L., Branfoot, C., & Bodaghi, M. (2026). Pellet-fed continuous-silk-fibre 3D/4D printing of PLA/bamboo-charcoal bio-composites with shape recovery and thermomechanical stability. Materials & Design, 290, 115704.
25. Borkar, T., Goenka, V., & Jaiswal, A. K. (2021). Application of poly-ε-caprolactone in extrusion-based bioprinting. Bioprinting, 21, e00111.
26. Shaik, Y. P., Schuster, J., & Shaik, A. (2021). A scientific review on various pellet extruders used in 3D printing FDM processes. Open Access Library Journal, 8(8), 1–19.
27. Emadi, H., Baghani, M., Masoudi Rad, M., Hoomehr, B., Baniassadi, M., & Lotfian, S. (2024). 3D-printed polycaprolactone-based containing calcium zirconium silicate: Bioactive scaffold for accelerating bone regeneration. Polymers, 16(10), 1389.
28. Liu, Y. Y., Blazquez, J. P. F., Yin, G. Z., Wang, D. Y., Llorca, J., & Echeverry-Rendon, M. (2023). A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application. European Polymer Journal, 198, 112388.
29. Oladapo, B. I., Zahedi, S. A., Ismail, S. O., & Omigbodun, F. T. (2021). 3D printing of PEEK and its composite to increase biointerfaces as a biomedical material-A review. Colloids and Surfaces B: Biointerfaces, 203, 111726.
30. Pisaneschi, G. (2025). Numerical and experimental exploration of patient-specific cranial implants with 3D-printed PEKK via Arburg Plastic Freeforming. Progress in Additive Manufacturing, 10, 8099–8111.
31. Curmi, A., Rochman, A., & Buhagiar, J. (2024). Influence of polyether ether ketone (PEEK) viscosity on interlayer shear strength in screw extrusion additive manufacturing. Additive Manufacturing, 84, 104086.
32. Zhang, B., Lu, S., Niu, J., Yang, C., Sun, C., & Li, D. (2024). Influence of reinforcement phase content on mechanical properties of hydroxyapatite/carbon fiber/polyether-ether-ketone composites 3D printed by screw extrusion. Composites Science and Technology, 258, 110843.
33. Whyman, S., Arif, K. M., & Potgieter, J. (2018). Design and development of an extrusion system for 3D printing biopolymer pellets. The International Journal of Advanced Manufacturing Technology, 96(9), 3417–3428.
34. Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022). Extrusion-based additive manufacturing technologies: State of the art and future perspectives. Journal of Manufacturing Processes, 83, 607–636.
