طراحی فلیپ‌فلاپ‌های جدید سه‌سطحی در نانوالکترونیک با استفاده از CNFET
محورهای موضوعی : مهندسی برق و کامپیوترکتایون رهبری 1 , سیدعلی حسینی 2
1 - انشکده مهندسی کامپیوتر و برق، دانشگاه آزاد اسلامی واحد یادگار امام خمینی
2 - دانشكده مهندسي كامپيوتر و برق، دانشگاه آزاد اسلامی واحد یادگار امام خمینی
کلید واژه: فلیپ‌فلاپ, مدارات سه‌سطحی, ترانزیستور نانوکربنی,
چکیده مقاله :
استفاده از مدارات چندسطحی می‌تواند باعث کاهش اتصالات داخل تراشه شود. کاهش اتصالات داخل تراشه‌ها باعث کاهش حجم تراشه و اتلاف توان در اتصالات می‌گردد. در سال‌های اخیر با توجه به توانایی نانوالکترونیک در طراحی مدارات چندسطحی، تحقیقاتی در این زمینه رونق گرفته است. مدارات ترتیبی، فلیپ‌فلاپ‌ها از اجزای مهم پردازنده‌ها و مدارات VLSI هستند. در این مقاله برای اولین بار، فلیپ‌فلاپ سه‌سطحی با پالس ژنراتور پیشنهاد گردیده و همین طور فلیپ‌فلاپ دیکد باینری به سه‌سطحی و نیز اولین فلیپ‌فلاپ با استفاده از بافر معرفی شده و سپس این فلیپ‌فلاپ‌ها با خودشان و مدارات قبلی مقایسه شده‌اند. همچنین از این فلیپ‌فلاپ‌ها در طراحی شمارنده سه‌سطحی استفاده شده است. نتایج شبیه‌سازی با نرم‌افزار HSPICE بیانگر عملکرد صحیح مدارات پیشنهادی می‌باشد. در مدل فلیپ‌فلاپ پالس ژنراتور STI %20، در فلیپ‌فلاپ SP %30 و در فلیپ‌فلاپ با بافر 30% بهبود در تأخیر و کاهش در تعداد ترانزیستور وجود دارد. همین طور در جدول مقایسه، مزایا و معایب هر کدام مورد بررسی قرار گرفته است.
Using multi-valued logic can reduce chip interconnections, which can have a direct effect on chip area and interconnections power consumption. In recent years, due to the ability of Nano electronics in the design of multi-level circuits, research in this field has flourished. The sequential circuits, flip-flops are important components of processors and VLSI circuits. In this paper, for the first time, a ternary flip-flop with a pulse generator has been proposed, and also a ternary binary-decode flip-flop and the first flip-flop using a buffer have been introduced. Then these flip-flops are compared with themselves and previous circuits. Also, these flip-flops have been used in the design of the ternary counter. The simulation results with HSPICE software show the correct performance of the proposed circuits. There is a 20% improvement in delay and a reduction in the number of transistors in the STI pulse generator flip-flop model, 30% in the SP flip-flop, and 30% in the buffer flip-flop. Also, in the comparison table, the advantages and disadvantages of each have been examined.
[1] M. Mukaidono, "Regular ternary logic functions ternary logic functions suitable for treating ambiguity," IEEE Trans. Computers, vol. 35, no. 2, pp. 179-183, Feb. 1986.
[2] A. Heung and H. T. Mouftah, "Depletion/enhancement CMOS for a lower power family of three-valued logic circuits," IEEE J. Solid-State Circuits, vol. 20, no. 2, pp. 609-616, Apr. 1985.
[3] M. H. Moaiyeri, Z. M. Taheri, M. Rezaei Khezeli, and A. Jalali, "Efficient passive shielding of MWCNT interconnects to reduce crosstalk effects in multiple-valued logic circuits," IEEE Trans. Electromagn. Compat., vol. 61, no. 5, pp. 1593-1601, Oct. 2019.
[4] M. Rezaei Khezeli, M. H. Moaiyeri, and A. Jalali, "Comparative analysis of simultaneous switching noise effects in MWCNT bundle and Cu power interconnects in CNTFET-based ternary circuits," IEEE Trans. Very Large Scale Integr. (VLSI) Syst., vol. 27, no. 1, pp. 37-46, Jan. 2019.
[5] K. Rahbari and S. A. Hosseini, "Novel ternary D-flip-flap-flop and counter based on successor and predecessor in nanotechnology," AEU Int. J. Electron. Commun., vol. 109, pp. 107-120, Sept. 2019.
[6] K. Rahbari and S. A. Hosseini, "Design of ternary logic gates and buffer based memory cell in nanoelectronics," International J. of Electronics, vol. 109, no. 11, pp. 1973-1995, 2022.
[7] A. Akturk, G. Pennington, N. Goldsman, and A. Wickenden, "Electron transport and velocity oscillations in a carbon nanotube," IEEE Trans. Nanotechnical, vol. 6, no. 4, pp. 469-474, Jul. 2007.
[8] A. Raychowdhury and K. Roy, "Carbon nanotube electronics: design of high-performance and low-power digital circuits," IEEE Trans. on Circuits Syst. I, Reg. Papers, vol. 54, no. 11, pp. 2391-2401, Nov. 2007.
[9] M. Moonesan, R. F. Mirzaee, M. S. Daliri, and K. Navi, "Robust fuzzy SRAM for accurate and ultra-low-power MVL and fuzzy logic applications," Electronics Letters, vol. 52, no. 25, pp. 2032-2034, Dec. 2016.
[10] Stanford Nanoelectronics Lab, VS-CNFET Model: Stanford University Virtual Source CNFET Model [Online]. (2008) Available: https://nano.stanford.edu/downloads/vs-cnfet-model.
[11] J. Shaikh and F. Rahman, "High speed and low power preset-able modified TSPC D flip-flop design and performance comparison with TSPC D flip-flop," in Proc. Int. Symp. on Devices, Circuits and Systems, 4 pp., Howrah, India, 29-31 Mar. 2018.
[12] J. Deng, et al., "Carbon nanotube transistor circuits: circuit-level performance benchmarking and design options for living with imperfections," in Proc. Int. Solid State Circuits Conf., pp. 70-588, Howrah, India, San Francisco, CA, USA, 11-15 Feb. 2007.
[13] M. Aguirre-Hernandez and M. Linares-Aranda, "A clock-gated pulse-triggered D flip-flop for low-power high-performance VLSI synchronous systems," in Proc. Int. Caribbean Conf. on Devices, Circuits and Systems, pp. 293-297, Playa del Carmen, Mexico, 26-28 Apr. 2006.
[14] M. H. Moaiyeri, A. Doostaregan, and K. Navi, "Design of energy-efficient and robust ternary circuits for nanotechnology," IET Circuits, Devices, Syst, vol. 5, no. 4, pp. 285-296, Jul. 2011.
[15] E. Shahrom, S.A Hosseini, "A new low power multiplexer based ternary multiplier using CNTFETs," AEU International Journal of Electronics and Communications, vol.15, no. 4, pp. 191-207,2018.
[16] S. Tabrizchi and K. Navi, "Novel CNTFET ternary circuit technoloques for high-performance and rnergy-efficient design," IET Circuits, vol. 13, no. 2, pp. 193-202, Mar. 2019.
[17] M. Takbiri and K. Navi, "Analysis review of noise margin in MVL: clarification of a deceptive matter," Circuits and System, vol. 38, pp. 4280-4301, 2019.
[18] M. Ghelichkhan, S. A. Hosseini, and S. H. Pishgar Komleh, "Multi-digit binaryto-quaternary and quaternary-to-binary converters and their applications in nanoelectronics," Circuits Syst. Signal Process., vol. 39, pp. 1920-1942, 2020.
[19] S. Kim and T. Lim, "An optimal gate design for the synthesis of ternary logic circuits," in Proc. 23rd Asia and South Pacific Design Automation Conf., ASP-DAC'18, pp. 476-481, Jeju, South Korea, 22-25 Jan. 2018.
[20] M. Shahangian, S. A. Hosseini, S. H. Pishgarkomleh, "Design of a multi-digit binary to ternary convert based on CNTFETs," Circuits and systems and Signal Processing, vol. 38, pp. 2544-2563, 2019.
[21] S. A. Hosseini, S. Etezadi, "A novel very low-complexity multi-valued logic comparator in nanoelectronics," Circuits and systems and Signal Processing, vol. 38, pp. 4056-4078, 2019.
[22] M. H. Moayeri and M. K. Q. Jooq, "Breaking the limits in ternary logic: an ultra efficient auto backup/restore nonvolatile ternary flip-flop using negative capacitance CNTFET technology," IEEE Access, vol. 9, pp. 132641-132651, 2021.
[23] A. A. Javadi, M. Morsali, and H. M. Moayeri, "Magnetic nonvolatile flip-flops with spin-hall assistance for power gating in ternary systems," J. of Computational Electronics, vol. 19, no. 3, pp. 175-1186, Sept. 2020.
[24] T. Sharma and L. Kumre, "Design of unbalanced ternary counters using shifting literals based D-Flip-Flops in carbon nanotube technology," Elsevier, Computer and Electronic J., vol. 93, Article ID: 107249, Jul. 2021.
[25] R. Faghih Mirzaee and N. Farahani, "Design of a ternary edge-triggered D flip-flap-flop for multiple-valued sequential logic," J. of Low Power Electronics, vol. 13, no. 1, pp. 36-46, Mar. 2017.
