Calculation of elasticity modulus and rock strength parameters and their relationship with porosity in Dalan formation in one of the well in south pars gas field
Subject Areas : Geoscience Fields in relation with Petroleum GeologyReza Khoshnevis Zadeh 1 , Alireza Hajian 2 , Ehsan Larki 3
1 -
2 - Islamic Azad University
3 - Islamic Azad University
Keywords: Elastic modulus, Rock strength parameters, DSI tool, Dalan formation.,
Abstract :
The elastic parameters of the rock include the Young modulus, the Poisson ratio, the bulk modulus and the shear modulus. Young modulus with the unconfined compressive strength of rock, are two key parameters in the definition of intact rock. Elastic modulus represents the amount of rock rigidity and is known as the stress-strain chart slope. These parameters represent of rock strength to failure, are important parameters for the stability analysis of wellbore stability. According to the unavailability and cost of core data, and also attended to this fact that the data from the core are not continuous and not available at all points in the well, the uses of DSI logs is one of the best methods for calculating elastic modules. Using these logs, you can also study elastic moduli continuously in a well. In this study, elastic dynamic parameters were calculated using the DSI and density logs for the Dalan Formation. Attention to the fact that the calculated parameters using the velocity of the sound waves are of the type of dynamic parameters, these parameters were have converted to the static modules using appropriate empirical relationships. The rock strength Parameters were calculated using the experimental relationships commonly used in the oil industry to determine rock strength parameters. These parameters were calculated according to static elastic modulus as well as porosity and shale volume. Comparing the values of elastic modulus and rock strength parameters with porosity showed that porosity with elastic modulus and rock strength parameters has an inverse relationship, so that with increases the porosity, the elastic modulus and rock strength parameters have been reduced.
علی پور، م.، بهلولی، ب.، 1389. ژئومکانیک در مهندسی نفت، کاربردها، بررسی شکاف هیدرولیکی و مدل¬سازی ژئومکانیکی:اکتشاف و تولید، شماره 76، صفحه 33-27.
Afsari, M., Amani, M., Razmgir, S. A. M., Karimi, H., and Yousefi, S. (2010). Using drilling and logging data for developing 1d mechanical earth model for a mature oil field to predict and mitigate wellbore stability challenges. International Oil and
Gas Conference and Exhibition in China, Society of Petroleum Engineers. Ameen.M., Smart.B., Somerville.J., Hammilton.S., and Naji.N (2009). "Predicting rock mechanical properties of carbonates from wireline logs (A case study: Arab-D reservoir, Ghawar field, Saudi Arabia)." Marine and Petroleum Geology 26(4): 430-444.
Edgell, H. (1977). The Permian system as an oil and gas reservoir in Iran, Iraq and Arabia. Proc. Second Iranian Geological Symposium, Tehran.
Goodman, R. E. (1989). Introduction to rock mechanics, Wiley New York. Hudson, J., Cornet,FH., Christiansson, R. "ISRM Suggested Methods for rock stress estimation—Part 1: Strategy for rock
stress estimation." International Journal of Rock Mechanics and Mining Sciences 40(7): 991-998. King, M. S. (1983). Static and dynamic elastic properties of rocks from the Canadian Shield. International Journal of Rock
Mechanics and Mining Sciences & Geomechanics Abstracts, Elsevier. Lashkaripour, G. R. (2002). "Predicting mechanical properties of mudrock from index parameters." Bulletin of Engineering
Geology and the Environment 61(1): 73-77. Nabaei, M., Shahbazi, KH., Shadravan, A., and Amani, M (2010). Uncertainty analysis in unconfined rock compressive
strength prediction. SPE Deep Gas Conference and Exhibition, Society of Petroleum Engineers. Najibi, A. R., et al. (2015). "Empirical relations between strength and static and dynamic elastic properties of Asmari and
Sarvak limestones, two main oil reservoirs in Iran." Journal of Petroleum Science and Engineering 126: 78-82. Plumb, R., Edwards, S., Pidcock. G., and Lee, D (2000). The mechanical earth model concept and its application to high-risk
well construction projects. IADC/SPE Drilling Conference, Society of Petroleum Engineers. Rahimpour bonab, h., Enayati-bidgoli, a.h., Navidtalab, a., and Mehrabi, h (2014). "Appraisal of intra reservoir barriers in the Permo-Triassic successions of the Central Persian Gulf, Offshore Iran." Geologica Acta: an international earth science journal 12(1).
Rahimpour-Bonab, H. (2007). "A procedure for appraisal of a hydrocarbon reservoir continuity and quantification of its heterogeneity." Journal of Petroleum Science and Engineering 58(1): 1-12.
Schlumberger (1995). "DSI*Dipole Shear Sonic Imager." 41. Tixier, M., et al. (1975). "Estimation of Formation Strength From the Mechanical-Properties Log (incudes associated
paper 6400)." Journal of Petroleum Technology 27(03): 283-293. Wang, Z. (2000). "Dynamic versus static elastic properties of reservoir rocks." Seismic and acoustic velocities in reservoir
rocks 3: 531-539.
Zoback, M. D. (2007). Reservoir geomechanics, Cambridge University Press.