Investigating the Absorption Performance of Ink-Jet Printed Microwave Transmission Line at S Band
Subject Areas : electrical and computer engineering
Mohammad Momeni-Nasab
1
,
سیدمنصور بیدکی
2
,
Mohsen Hadizadeh
3
,
Masoud Movahhedi
4
1 - Yazd University
2 -
3 - Yazd University
4 - Yazd University
Keywords: Transmission lineink-jet printingreactive inkssilver nanoparticlesmicrowave,
Abstract :
Ink-jet printing technology is one of the most promising printing techniques enabling fabrication of conductive patterns in a one-step and direct process. In this study, a microwave transmission line is fabricated on RO4003C substrate using water-based reactive inks and ink-jet printing technique. The fabricated transmission line structure includes an ink-jet printed silver line, a dielectric layer, and a continuous metallic ground plate. The conductivity of the printed line is measured using Four-point probe method. The electromagnetic wave absorption rate of the printed transmission line is simulated according to the measured conductivity, which proves a good agreement with the measured absorption rate at S band (2-4 GHz frequency range).
[1] Transmission Line Theory. Available from: http://deltauniv.edu.eg/new/engineering/wp-content/uploads/chap.3.pdf, [cited 2019 Sep 2nd].
[2] Transmission Lines. Available from: http://www.eas.uccs.edu/~mwickert/ece3110/lecture_notes/N3110_2.pdf, [cited 2019 Sep 2nd].
[3] RamezaniBoldaji, K., M. Movahhedi, and A. GhafoorzadeYazdi, An Ultra Wide Bandpass Filter with Wide Stop Band Based on Metamaterial Structures. Journal of Electrical Engineering, 49(1): p. 191-199, 2019.
[4] Fesharaki, F., et al. Mode-selective transmission line for DC-to-THz super-broadband operation. in 2016 IEEE MTT-S International Microwave Symposium (IMS). IEEE, 2016.
[5] Alibakhshi‐Kenari, M., et al., Compact antenna based on a composite right/left‐handed transmission line. Microwave and Optical Technology Letters, 57(8): p. 1785-1788, 2015.
[6] Naqui, J., M. Durán-Sindreu, and F. Martín, Modeling split-ring resonator (SRR) and complementary split-ring resonator (CSRR) loaded transmission lines exhibiting cross-polarization effects. IEEE Antennas and Wireless Propagation Letters, 12: p. 178-181, 2013.
[7] Heidari, A.A., Design and Implementation of a Circularly Polarized Microstrip Patch Antenna for GPS Application with Input VSWR Tuning Capability. Iranian Journal of Electrical and Computer Engineering, 5(3): p. 168, 2008.
[8] Bidoki, S.M., et al., Inkjet printing of conductive patterns on textile fabrics. AATCC review, 5(6): p. 11, 2005.
[9] Kao, H.-l., et al., Inkjet-printed silver films on textiles for wearable electronics applications. Surface and Coatings Technology, 362: p. 328-332, 2019.
[10] Huber, B., et al., Rotate-to-bend setup for fatigue bending tests on inkjet-printed silver lines. Flexible and Printed Electronics, 3(3): p. 035005, 2018.
[11] Sim, S.-m., et al., RF performance of ink-jet printed microstrip lines on rigid and flexible substrates. Microelectronic Engineering, 168: p. 82-88, 2017.
[12] Sim, S.-m., et al., Transmission line printed using silver nanoparticle ink on FR-4 and polyimide substrates. Micro and Nano Systems Letters, 4(1): p. 7, 2016.
[13] Wang, J., S. Lam, and E.G. Lim. RF performance evaluation of microstrip lines printed on flexible polyethylene terephthalate (PET) films. in 2015 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP). IEEE, 2015.
[14] Fatemeh Mohtaram, et al., The Development of Textile Based Microstrip Antenna Using Inkjet Printing. Journal of Advanced Materials In Engineering, 33(3): p. 61-78, 2015.
[15] Camarchia, V., et al., Demonstration of inkjet-printed silver nanoparticle microstrip lines on alumina for RF power modules. Organic Electronics, 15(1): p. 91-98, 2014.
[16] Belhaj, M.M., et al. Inkjet printed flexible transmission lines for high frequency applications up to 67 GHz. in 2014 44th European Microwave Conference. IEEE, 2014.
[17] Bidoki, S., et al., Ink-jet fabrication of electronic components. Journal of Micromechanics and Microengineering, 17(5): p. 967, 2007.
[18] Bidoki, S.M., J. Nouri, and A. Heidari, Inkjet deposited circuit components. Journal of Micromechanics and Microengineering, 20(5): p. 055023, 2010.
[19] Nouri, J., S.M. Bidoki, and A.A. Heidari, Printing Conductive Lines and Surfaces on Different Substrates Using Inkjet Printing Method. Iranian Journal of Electrical and Computer Engineering,. 9(2): p. 85, 2012.
[20] Simulator, H.F.S., Ansoft corp. Pittsburgh, PA, 2012.
[21] Sheet, R.R.L.D., Rogers Corp., Chandler, AZ, USA, 2018.
[22] Momeni-Nasab, M., S.M. Bidoki, and A.A. Heidari, Inkjet-Fabricated Capacitors on Paper and Textile Fabrics. JOURNAL OF TEXTILES AND POLYMERS, 7(1): p. 45-52, 2019.
[23] Webster, J.G., Electrical measurement, signal processing, and displays. CRC Press, 2003.
