Designing an Adaptive Sliding-Mode Controller for Car Active Suspension System Using an Optimal logarithmic Sliding Surface
Subject Areas : electrical and computer engineeringS. A. Zahiripour 1 , R. Tafaghodi 2 , A. A. Jalali 3 , S. K. Mousavi Mashhadi 4
1 - University of Science and Technology
2 - University of Science and Technology
3 - University of Science and Technology
4 - University of Science and Technology
Keywords: Active suspension system sliding mode adaptive approach uncertainty logarithmic sliding surface,
Abstract :
In this paper, a quarter car active suspension system with a hydraulic actuator, has been controlled by sliding mode coupled with an adaptive approach. To deal with all kinds of uncertainty arising from the effect of external perturbation or the any nonlinear behavior system, sliding mode control has been used. In the proposed method the sliding surface, by using an optimal strategy to minimize the optimal cost function is derived, so the result is a logarithmic sliding surface. Adaptive algorithms proposed in this paper because of the nonlinear variability by time and not bounded uncertainty in the system. While the effects of parameter uncertainties and external disturbances to system performance have been dramatically reduced, the stability of control system proves based on the Lyapanof theory. The proposed control method has been done on a quarter car active suspension system with a hydraulic actuator. Simulation results of the proposed method show that the activation of suspension system by the proposed method increases its performance compare with the passive suspension system.
[1] M. Xin and J. Fei, "Adaptive sliding mode controller for vehicle suspension system," in Proc. Int. Conf. on Information Science and Technology, pp. 811-816, Mar. 2011.
[2] H. Y. Chen and S. J. Huang, "Adaptive sliding controller for active suspension system," in Proc. Int. Conf. on Control and Automation, vol. 1 pp. 282-287, Jun. 2005.
[3] S. Chantranuwathana and H. Peng, "Adaptive robust force control for vehicle active suspensions," Int. J. of Adaptive Control and Signal Processing, vol. 18, no. 2, pp. 83-102, Mar. 2004.
[4] J. Lin, R. J. Lian, C. N. Huang, and W. T. Sie, "Enhanced fuzzy sliding mode controller for active suspension systems," Mechatronics, vol. 19, no. 7, pp. 1178-1190, Oct. 2009.
[5] N. Yagiz, Y. Hacioglu, and Y. Taskin, "Fuzzy sliding-mode control of active suspensions," IEEE Trans. on Industrial Electronics, vol. 55, no. 11, pp. 3883-3890, Nov. 2008.
[6] A. A. Wijaya, Wahyudi, R. Akmeliawati, and F. J. Darsivan, "Natural logarithm sliding mode control (ln-SMC) using EMRAN for active engine mounting system," in Proc. 11th Int. Conf. Control, Automation, Robotics, and Vision Singapore, pp. 1365-1369, Dec. 2011.
[7] S. A. Zahiripour and A. A. Jalali, "Designing an adaptive sliding - mode controller for car active suspension system using an optimal proportional - integral sliding surface," in Proc. Int.l Conf. on Future Information Technology and Management Science & Engineering Lecture Notes in Information Technology, vol. 14, pp. 248-255, Apr. 2012.
[8] Y. P. Chen and J. L. Chang, "A new method for constructing sliding surfaces of linear time - invariant systems," Int. J. of Systems Science, vol. 31, no. 4, pp. 417-420, Nov. 2010.
[9] F. Deepak, B. Bandyopadhyay, and L. Fridman, "Non - linear sliding surface: towards high performance robust control," IET Control Theory App.l, vol. 6, no. 2, pp. 235-242, Jan. 2010.
[10] R. Chuanbo, W. Liang, Z. Cuicui, and L. Lin, "Variable structure model following control for dual-input active suspension," in Proc. of IEEE, 6 pp., Wuhan, China, 25-26 Dec. 2010.
[11] S. Hui, Q. Wei, and W. Enrong, "The sliding model-following control for semi-active MR-vehicle suspension," in Proc. of 2nd Int. Conf. Information Engineering and Computer Science, pp. 351-354, Apr. 2010.
[12] B. Assadsangabi, M. Eghtesad, F. Daneshmand, and N. Vahdati, "Hybrid sliding mode control of semi-active suspension systems," Smart Mater. Struct, vol. 18, no. 12, pp. 1-10, Nov. 2009.
[13] B. L. Zhang, G. Y. Tang, and F. L. Cao, "Optimal sliding mode control for active suspension systems," in Proc. of the IEEE International Conf. on Networking, Sensing, and Control, pp. 351-356, Okayama, Japan, Mar. 2009.
[14] E. Chavez-Conde, F. Beltran-Carbajal, A. Blanco-Ortega, and H. Mendez-Azua, "Sliding mode and generalized PI control of vehicle active suspensions," in Proc. 18th IEEE Int. Conf. on Control Applications Part of IEEE Multi - Conf. on Systems and Control, Saint Petersburg, pp. 1726-1731, Jul. 2009.
[15] S. G. Sajad and B. H. Mohammad, "Optimal design of rotating sliding surface for sliding mode control," in Proc. American Control Conf., pp. 774-777, Jun. 2009.
[16] م. معاونيان، م. شهاب و ا. م. پاشايينژاد، "عيبيابي سيستم تعليق فعال خودرو با در نظر گرفتن رفتار غير خطي عملگر هيدروليکي و ملاحظه اختلال در کنترلر،" دومين كنفرانس تخصصي پايش وضعيت و عيبيابي ماشينآلات، صص. 427-418، اسفند 1386.
[17] S. Toyama, F. Ikeda, and Y. Sorimachi, "A second - order sliding mode controller for active suspension systems," in Proc. Int.Conf. on Control, Automation, and Systems, pp. 18-23, Oct. 2008.
[18] J. D. Sanchez - Torres, A. G. Loukianov, M. I. Galicia, J. Ruiz, and J. Rivera, "ABS and active suspension control via high order sliding modes and linear geometric methods for disturbance rejection," in Proc. Int. Conf. on Digital Object Identifier, 6 pp., Oct. 2011.
