Wind Power Modeling Using Fuzzy-Markov Approach in Power System Reliability
Subject Areas : electrical and computer engineering
1 - Tarbiat Modares University
2 - Tarbiat Modares University
Keywords: Capacity credit fuzzy-Markov Markov chain Monte Carlo simulation wind power,
Abstract :
As intermittent wind power generation becomes more significant in power generation, it becomes increasingly important to assess its impact on the generation reliability of power systems. Therefore, it is the objective of this paper to evaluate the impact of wind power on the power system reliability. In this paper, different approaches of wind power modeling are explained. Markov chain Monte Carlo (MCMC) and ARMA method are used to model of wind power output. Then Fuzzy-Markov method for wind power modeling is proposed. The proposed method is capable of modeling wind farms that have insufficient wind speed data. Finally, capacity credit of wind power is calculated.
[1] G. R. Pudaruth and F. Li, "Capacity credit variation in distribution systems," in Proc. IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, 7 pp., 20-24 Jul. 2008.
[2] M. Milligan and K. Porter, "Wind capacity credit in the United States," in Proc. IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, 5 pp., 20-24 Jul. 2008.
[3] L. Wang and C. Singh, "A new method for capacity credit estimation of wind power," in Proc. 15th National Power Systems Conf. (NPSC), IIT Bombay, pp. 570-573, Dec. 2008.
[4] R. Karki and P. Hu, "Impact of wind power growth on capacity credit," in Proc. Electrical and Computer Engineering, Canadian Conf., pp. 1586-1589, 22-26 Apr. 2007.
[5] G. R. Pudaruth and F. Li, "Locational capacity credit evaluation," IEEE Trans. on Power Systems,, vol. 24, no. 2, pp. 1072-1079, May 2009.
[6] R. Karki, "Renewable energy credit driven wind power growth for system reliability," Electric Power Systems Research, vol. 77, no. 7, pp. 797-803, May 2007.
[7] W. Wijarn and R. Billinton, "Considering load - carrying capability and wind speed correlation of WECS in generation adequacy assessment," IEEE Trans. on Energy Converstion, vol. 21, no. 3, pp. 734-741, Sep. 2006.
[8] R. Karki, P. Hu, and R. Billinton, "A simplified wind power generation model for reliability evaluation," IEEE Trans. on Energy Converstion, vol. 21, no. 2, pp. 533-540, Jun. 2006.
[9] P. Giorsetto and K. F. Utsurogi, "Development of a new procedure for reliability modeling of wind turbine generators," IEEE Trans. PAS, vol. 102, no. 1, pp. 134-143, Jan. 1983.
[10] A. P. Leite, C. L. T. Borges, and D. M. Falcao, "Probabilistic wind farms generation model for reliability studies applied to brazilian sites," IEEE Trans. on Power Systems, vol. 21, no. 4, pp. 1493-1501, Nov. 2006.
[11] Z. Yu and A. Tuzuner, "Wind speed modeling and energy production simulation with Weibull sampling," in Proc. IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, 6 pp., 2008.
[12] G. Papaefthymiou and B. Klockl, "MCMC for wind power simulation," IEEE Trans. on Energy Conversion, vol. 23, no. 1, pp. 234-240, Mar. 2008.
[13] http://www.climate.weatheroffice.ec.gc.ca/climateData/hourlydata_e.html
[14] R. Billinton, S. Kumar, N. Chowdhury, K. Debnath, L. Goel, E. Khan, P. Kos, G. Nourbakhsh, and J. Oteng - Adjei, "A reliability test system for educational purposes - basic data," IEEE Trans. Power Syst., vol. 4, no. 4, pp. 1238-1244, Aug. 1989.
