List of Articles فروافتادگی دزفول

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Fractures systematic analysis Asmari reservoir Formation in the Marun oil field (based on image logs interpretation results)
  فارسی مدان arsimadan
  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologist More

  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologists.. Marun oil field is one of the largest oil fields in the South West Iran of the city of Ahvaz in the Northeast and the North embayment Dezful of geology in the eastern. Marun field is the most important Asmari reservoir. The aim of this study was to investigate systematically Asmari reservoir fractures and the development of fractures in the reservoir. For this purpose, using image logs, best and most complete method interpretation and results of 11 wells in fracture studying and 16 wells in in-situ stress direction studying. According to frequency of fractures (based on image logs interpretation results) in the southern and north-eastern limb of the field, The theory of tectonic folding and bending events later caused the possible activities during the north-south strike-slip faults affect the compression force has been created to strengthen. Most of image logs data in Marun field are fractures with extensions; N155E, N130E, N95E, N60E, N30E. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Fractures systematic analysis Asmari reservoir Formation in the Marun oil field (based on image logs interpretation results)
  Zahra Kamali Mohammad reza Mahdevar meysam farsi madan
  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologi More

  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologists.. Marun oil field is one of the largest oil fields in the South West Iran of the city of Ahvaz in the Northeast and the North embayment Dezful of geology in the eastern. Marun field is the most important Asmari reservoir. The aim of this study was to investigate systematically Asmari reservoir fractures and the development of fractures in the reservoir. For this purpose, using image logs, best and most complete method interpretation and results of 11 wells in fracture studying and 16 wells in in-situ stress direction studying. According to frequency of fractures (based on image logs interpretation results) in the southern and north-eastern limb of the field, The theory of tectonic folding and bending events later caused the possible activities during the north-south strike-slip faults affect the compression force has been created to strengthen. Most of image logs data in Marun field are fractures with extensions; N155E, N130E, N95E, N60E, N30E Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Fractures systematic analysis Asmari reservoir Formation in the Marun oil field (based on image logs interpretation results)
  meysam farsi madan Mohammad reza Mahdevar Zahra Kamali
  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologi More

  In the oil buildings to investigate fractures in the reservoir rock fractures in stages of production and field development is very important and necessary. Now application of software repository in the realization of this issue will help to petroleum with the geologists.. Marun oil field is one of the largest oil fields in the South West Iran of the city of Ahvaz in the Northeast and the North embayment Dezful of geology in the eastern. Marun field is the most important Asmari reservoir. The aim of this study was to investigate systematically Asmari reservoir fractures and the development of fractures in the reservoir. For this purpose, using image logs, best and most complete method interpretation and results of 11 wells in fracture studying and 16 wells in in-situ stress direction studying. According to frequency of fractures (based on image logs interpretation results) in the southern and north-eastern limb of the field, The theory of tectonic folding and bending events later caused the possible activities during the north-south strike-slip faults affect the compression force has been created to strengthen. Most of image logs data in Marun field are fractures with extensions; N155E, N130E, N95E, N60E, N30E. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Studying Maturity and Migration Routes Using Two-Dimensional Modeling in a number of Dezful Dam Oilfields
  Ashkan Maleki Seyed Ali Moallemi Mohammad Hossein Saberi Mohammad Hassan Jazayeri
  To the southwest of Iran there are large reservoirs of oil and gas including Jurassic and Cretaceous carbonates, with good source rocks in the succession of the Early Cretaceous and Jurassic. The purpose of this study was to investigate the production, migration and cha More

  To the southwest of Iran there are large reservoirs of oil and gas including Jurassic and Cretaceous carbonates, with good source rocks in the succession of the Early Cretaceous and Jurassic. The purpose of this study was to investigate the production, migration and characterization of Pabdeh, Kazhdumi, Garru and Serglu source rocks in the study area. For this purpose, burial history and one-dimensional thermal modeling in four wells and two-dimensional modeling in one section for the study area were evaluated using Openuploo software to determine the maturity of layers and hydrocarbon outflow. Comparison of measured vitrinite temperature and reflectance values with model results was used for model calibration. The results of one-dimensional modelling of the burial and thermal history in this study show that the Sergloo, Grove and Kazhdumi formations have reached maturity and have had hydrocarbon outflow, but the Pabdeh Formation has not reached sufficient maturity for hydrocarbon maturation and production. The results of migration model in the studied section show that the two Early Cretaceous and Middle Cretaceous hydrocarbon systems were separated by Kazhdumi Formation and therefore hydrocarbon migration in deeper layers of Kazhdumi was mostly lateral to Abadan plain. The hydrocarbon produced from the Kazhdumi Formation, in addition to ornithologically rearing the upper layers, migrated to the Ilam and Sarvak layers due to the general slope of the layers laterally and toward the Abadan plain. In general, the process of maturation of source rocks decreased from east to west of the study area. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Strain and shortening amount analysis in the Asmari anticline, Khuzestan province
  Babak Samani Abbas Charchi Narges Khatib
  10.61186/ispg.40876.11.22.54
  The only outcrop of Asmari formation in the Dezful embayment is visible in the Asmari anticline. In order to estimate the strain parameters and shortening values, 26 geological cross sections were prepared perpendicular to the anticline axis. Based on the, interlimb ang More

  The only outcrop of Asmari formation in the Dezful embayment is visible in the Asmari anticline. In order to estimate the strain parameters and shortening values, 26 geological cross sections were prepared perpendicular to the anticline axis. Based on the, interlimb angle measurements, the interlimb angles of the northern and central parts of the anticline show smaller angles than the southern parts. Determination of strain ratio (R) values indicates the strain values between 1.12 - 1.52. The zoning map of strain ratio values shows higher strain values in the northern and central parts of the anticline. Using geological cross sections and measuring the base length of the folded layer of Asmari formation (L0) and the straight length of the layer (L1), the percentage of shortening values were calculated in each section. The results show the occurrence of 1.8% to 12% shortening in different parts of the anticline. Shortening map of the Asmari anticline shows more shortening amounts in the northern and central parts of the anticline than the southern parts. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Reservoir quality evaluation of the Asmari Formation in the framework of sequence stratigraphy in one of the Iranian SW oilfield
  Ebrahim Sfidari A. Hakymi-Zanuz
  The Oligo-Miocene Asmari Formation forms the main reservoir rock of many Dezful Embayment fields. Microfacies analysis, diagenetic features, and sequence stratigraphic evaluation of the Asmari Formation were carried out based on the petrographic investigation, petrophys More

  The Oligo-Miocene Asmari Formation forms the main reservoir rock of many Dezful Embayment fields. Microfacies analysis, diagenetic features, and sequence stratigraphic evaluation of the Asmari Formation were carried out based on the petrographic investigation, petrophysical logs, and core measurement porosity and permeability data. Petrographic analyses led to the identification of twelve microfacies indicating five subenvironments including tidal flat, lagoon, barrier (belonging to inner ramp), middle ramp, and outer ramp, all of which are representing a homoclinal ramp. Tidal flat, lagoonal, and barrier microfacies are mostly present in the upper parts of the Asmari Formation, while middle and outer ramp microfacies were largely developed in the middle part. Cementation, compaction, dolomitization, dissolution, and fracturing are the main diagenetic processes in this formation. Compaction and cementation have negatively affected reservoir quality while fracturing, dolomitization, and dissolution contributed to reservoir quality enhancement. The sequence stratigraphic studies represent three 3rd order sequences of early Aquitanian, late Aquitanian, and early Burdigalian age based on the main features of microfaces, their depositional environments, and shallowing and deepening-upward trends. Microfacies of the Transgressive System Tract (TST) have been affected by compaction, dissolution (moldic), cementation, and slightly dolomitization in the middle to outer ramp parts. The Highstand System Tract in the inner ramp part has been affected by dolomitization, dissolution, and fracturing close to the sequence boundaries, and has a better reservoir quality than the Transgressive System Tract. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Strain and shortening analyses in the Asmari horizon, Kupal oil field, Khuzestan province
  Babak Samani Mina Parvin Abbas Charchi Mohammad Hossein Talebifard
  Kupal Oil Field is one of the important oil fields in the Zagros Basin, located in the eastern part of the Dezful embayment, adjacent to Aghajari Oil Field and Marun Oil Field. Some characteristics of the fold elements, such as the fold interval angle and axial surface, More

  Kupal Oil Field is one of the important oil fields in the Zagros Basin, located in the eastern part of the Dezful embayment, adjacent to Aghajari Oil Field and Marun Oil Field. Some characteristics of the fold elements, such as the fold interval angle and axial surface, were determined in the Asmari folded horizon using the interpreted seismic profiles. Based on the deviation of the axial surface from the vertical surface and determination of shear angle and shear strain, minimum and maximum quadratic stretch and strain ratio (R) values were calculated in different parts of the anticline. With application of graphical functions the amounts of fold aspect ratio were determined along the anticline. Base on the results, the amounts of shear strain varies from 0.01 to 0.09 in deferent parts of anticline. Also results show the amounts of strain ratio in range of 1.25 to 1.38 and shortening about 5% to 17% in different parts of the kupal anticline oil field. Manuscript profile