Sedimentary environment

Open Access Article

1 - Cruziana ichnofacies from Nayband Formation (Late Triassic) in the Parvadeh section, Southwest Tabas, East central Iran
Nasrollah Abbassi Mohammad ghavidel Morteza Yosefi Navid Navidi Izad

Nayband Formation is composed of sandstone, coal bearing shales, siltstone, and fossiliferous limestone in the southwest Tabas section, east central Iran. In this section, it is 1410 m in thickness and Late Triassic in age. A divers trace fossils have been found in the More

Nayband Formation is composed of sandstone, coal bearing shales, siltstone, and fossiliferous limestone in the southwest Tabas section, east central Iran. In this section, it is 1410 m in thickness and Late Triassic in age. A divers trace fossils have been found in the middle parts of sequence as 400-600 m. These trace fossils include Lockeia isp., Palaeophycus tubularis, Palaeophycus striatus, Planolites beverleyensis, Rhizocorallium isp., Rosselia isp., and cf. Treptichnus isp. This ichnoassemblage is attributable to Cruziana ichnofacies with presence of Lockeia isp., Rhizocorallium isp., and, Rosselia isp. This part of Nayband Formation was deposited in low energy conditions below fair-weather wave base. Manuscript profile

Open Access Article

2 - Lithostratigraphy and Sedimentary Environment of the Jahrum Formation in two Anticlines of Jahrum and Tudej
رضا صادقی محمد حسین خواجوئی مریم جوکار

Abstract In this study two stratigraphic sections named Tang-e Ab as type section and Tang-e Nimbashi analyzed in order to study lithostratigraphy and microfacies of Jahrum Formation in Fars province. Both sections, Tang-e Ab in northern flank of Jahrum Anticline (Ea More

Abstract In this study two stratigraphic sections named Tang-e Ab as type section and Tang-e Nimbashi analyzed in order to study lithostratigraphy and microfacies of Jahrum Formation in Fars province. Both sections, Tang-e Ab in northern flank of Jahrum Anticline (East of Jahrom) and Tang-e Nimbashi in northern flank of Tudej Anticline (West of Estahban) located in Interior Fars Sub-Zone at Zagros folded belt. Tang-e Ab section included 450 meters of conglomerate, limestone, nodular marly limestone, dolomitic limestone and dolostone with thin, medium, thick and very thick bedding and Tang-e Nimbashi section included 562 meters of limestone, marly Limestone, nodular marly limestone, dolomitic limestone and dolostone with very thin, thin, medium, thick and very thick bedding. The result of field and laboratory observations is determination of 10 lithostratigraphic unit and 10 microfacies class in Tang-e Ab and 7 lithostratigraphic unit and 11 microfacies class in Tang-e Nimbashi, in both Sections 3 sub-environments included: open marine, lagoon and peritidal and sedimentary settings corresponded on a carbonate platform of homoclinal ramp. Manuscript profile

Open Access Article

3 - Interpretation of sedimentary environment and factors affecting reservoir quality in upper Sarvak Formation in one the oil fields of Abadan plain
Mohammad Hossein Saberi Bahman Zarenezhad الهام اسدی Nasim Rahmani

The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an important More

The Sarvak Formation of the Albian-Turonian Formation is one of the most important hydrocarbon reservoirs in south and southwest of Iran. In this study, in order to assess the reservoir quality, from a petrographic study and porosity and permeability data, an important well in one of the oil fields of Abadan plain has been used. Based on microscopic studies, 13 microfacies have been identified in the form of Four facies tidal flat, lagoon, shoal and open marine for Sarvak Formation deposits in the studied oil field, indicating that the upper part of the Sarvak Formation is deposited in a homoclinal carbonate ramp. Among the identified diagenetic processes, dissolution, cementation, dolomitization, fracturing, compaction, neomorphism, micritization, bioturbation, pyritization, hematitization, phosphatization and silicification are mentioned. Diagenetic processes of Sarvak Formation occurred in three marine, meteoric and burial environments. Among the dissolution and fracturing diagenetic processes, the most important role has been in increasing the reservoir quality, and cementation and compaction have been the most important factors in reducing reservoir quality. Sequence stratigraphy studies identified third order sedimentary sequences of the age of Turonian, Late Cenomanian, and Middle Cenomanian, and studied the facies and diagenetic processes within its framework. Correlation of porosity and permeability data of the core showed that the reservoir quality in this formation was influenced by facies and diagenetic processes. So that the microfacies containing the rudist have the highest reservoir quality. Due to the diagenetic processes, sedimentary and porosity and permeability data, the facies shoal and open marine to the land have the best reservoir quality. Manuscript profile

Open Access Article

4 - (Biostratigraphy and microfacies of the Asmari Formation in south flank of Mish anticline (northeast of Gachsaran
Saber Ahmadi Ali seyrafian Hosyen vaziri-Moghadam

Asmari Formation at the section of the south flank of Mish anticline (northeast of Gachsaran), located 22 km northeast of Basht city, in vicinity village Kalagh ¬Neshin is investigated and has a thickness of 281 meters. In this research, biostratigraphy and microfacies More

Asmari Formation at the section of the south flank of Mish anticline (northeast of Gachsaran), located 22 km northeast of Basht city, in vicinity village Kalagh ¬Neshin is investigated and has a thickness of 281 meters. In this research, biostratigraphy and microfacies of the Asmari Formation in this section were studied and the results were compared with 5 section of Asmari Formation in similar regions and close to it. By studying on 172 microscopic sections, 3 the biozone for Asmari Formation in the section the study was carried out and the section studied given that is: Lepidocyclina – Operculina – Ditrupa assemblage zone. Archaias asmaricus – Archaias hensoni – Miogypsinoides complanatus assemblage zone. Indeterminate zone. According to the study of benthic foraminifera and biozones, the cut off age is from the late Oligocene (Rupelian-Chattian) to the early Miocene (Aquitanian). Microfacies studies led to identify 10 microfacies and 4 subfacial belonging to the open marine and lagoon (semi-closed and enclosed) environments, which includes the external, intermediate, and interior parts of a hemocalinal ramp. Manuscript profile

Open Access Article

5 - Microfacies analysis, Sedimentary Environment and Sequence Stratigraphy of the Qom Formation in the Naraq area
Alireza Ashouri Asma Aftabi arani Jahanbakhsh Daneshian Abbas Ghaderi Mohammad Reza Aria Nasab

Naraq section is located at the South of the Qom sedimentary basin in Central Iran. The study of microfacies sedimentary environments and sequence stratigraphic features of the Qom Formation in this area can help to understand the situation of the Qom sedimentary basin. More

Naraq section is located at the South of the Qom sedimentary basin in Central Iran. The study of microfacies sedimentary environments and sequence stratigraphic features of the Qom Formation in this area can help to understand the situation of the Qom sedimentary basin. In this study, 111 samples of the Qom Formation in Naraq section in the northwest of Naraq are investigated. Based on field observation and thin-section studies, 6 microfacies related to the lagoon, reef and slope parts of carbonate platform have been recognized.Due to the presence of slope microfacies and skeletal and non-skeletal grains that are transported from the shallow to this environment and the existence of SMF9, bioturbation, Also the presence of barrier / reef sediments, a carbonate shelf depositional environment is suggested for the Qom Formation in Naragh section. In this model, marls of b member of the Qom Formation show more relative depth. Also sequence stratigraphic studies show that the Naraq section is composed of three sedimentary sequences of third- order three types I and one type II sequence boundaries were recognized in this formation. Manuscript profile

Open Access Article

6 - Qom Formation, Microfacies, Depositional sequence, Maragh area.
Amrolah Safari Hossein Ghanbarloo Ebrahim Mohammadi

The Qom Formation is located at the Maragh area (20 kilometers southwest of Kashan). The formation with 216 m thickness contains shale and limestones. Volcanic rocks unconformably are covered by the Qom Formation. The upper boundary of the Qom Formation with the Upper R More

The Qom Formation is located at the Maragh area (20 kilometers southwest of Kashan). The formation with 216 m thickness contains shale and limestones. Volcanic rocks unconformably are covered by the Qom Formation. The upper boundary of the Qom Formation with the Upper Red Formation is also unconformable. Nine microfacies and terrigenous facies were identified based on the main components and sedimentological features. These microfacies and terrigenous facies were deposited on an open-shelf carbonate platform. Three environments were recognized in this carbonate platform. These environments include the inner shelf (restricted and semi-restricted lagoon), middle shelf, and outer shelf. In addition, three third-order and one incomplete depositional sequences were identified based on the vertical distribution of microfacies. Manuscript profile

Open Access Article

7 - Investigating the role of microfacies, depositional conditions and diagenesis on the quality of the reservoir section, Ilam Formation (Santonian-Campanian) in one of the fields in southwestern Iran, Dezful embayment
Seyedeh Akram Jooybari Peyman Rezaei Majid Mehdipour

10.52547/ispg.39683.11.21.16

The Ilam formation is one of the important carbonate oil reservoirs of the Zagros and Dezful embayment basins. In order to identify the microfacies and depositional conditions and diagenesis processes, 100 microscopic thin sections from one well of this reservoir in on More

The Ilam formation is one of the important carbonate oil reservoirs of the Zagros and Dezful embayment basins. In order to identify the microfacies and depositional conditions and diagenesis processes, 100 microscopic thin sections from one well of this reservoir in one of the Dezful embayment oil fields were evaluated. Porosity and permeability data were used to check reservoir quality. The petrographic study led to the identification of 9 microfacies belonging to the facies belts of lagoon, barier, middle ramp and outer ramp, which were deposited in the homoclinal ramp environment. The most important diagenesis processes identified in Ilam reservoir include cementation, dissolution, fracture, micriteization, stylolitization, and dolomitization. Based on the qualitative classification of the reservoir and Lucia's petrophysical diagrams, the lagoon facies and the middle ramp have an average reservoir status, and the carbonate barier facies and the outer ramp have a weak reservoir status. The reservoir quality of the lagoon and middle ramp facies is related to the existence of interconnected and channel porosities. Due to strong cementation and the presence of unrelated porosity such as mold porosity, the carbonate barier facies has low permeability and has a poor reservoir status. In general, the Ilam Formation in the studied field is in a weak state in terms of reservoir, which can be important in addition to the facies controllers in relation to the lack of expansion of fracture and dolomitization and the excessive expansion of cementation in these facies. Therefore, the Ilam Formation in the studied field has a weak reservoir performance due to diagenetic processes, despite having more shallow sequences than deep ones. Manuscript profile

Open Access Article

8 - The history of deposition and post-deposition and their effects on the reservoir quality of Asmari Formation in Ahvaz oilfield
Akbar Heidari Milad Faraji Narges Shokri

The carbonate interval of the Asmari formation along with sandstone deposits were deposited in most areas of the Zagros sedimentary Basin, including the Ahvaz area, in Oligo-Miocene. In this study, the effects of depositional and post-depositional environments on the re More

The carbonate interval of the Asmari formation along with sandstone deposits were deposited in most areas of the Zagros sedimentary Basin, including the Ahvaz area, in Oligo-Miocene. In this study, the effects of depositional and post-depositional environments on the reservoir quality of zone A7 of the Asmari Formation in well No. 4 in Ahvaz oil field were studied. The study of the sequences of the Asmari Formation in this section led to the identification of 11 carbonate facies, one evaporite facies, one mixed carbonate-siliciclastic facies, and one siliciclastic facies. Sedimentary environments of tidal zone, lagoon, coral reef and open sea were introduced for the depositional environment of identified facies. Due to the absence of sudden changes, it seems that the studied deposits were deposited in a ramp-type carbonate platform that was influenced by siliciclastic sediments from the Zagros river systems. The immature sedimentary texture of the sandstone facies indicates the proximity of the origin of the quartz sources to the carbonate basin. Among the diagenetic processes that have affected the examined sequences, the following processes can be mentioned: micritization, cementation, neomorphism, physical and chemical compaction, dissolution, fracture development and filling, dolomitization, and anhydritization. These diagenetic processes occurred in post-depositional marine, meteoric and burial diagenetic environments. Many fractures were filled with petroleum, which indicates that fractures, along with dolomitization, chemical compaction, and fenestral pores, are among the most important post-sedimentation complications to increase reservoir quality. While cementation and anhydritization resulted in reducing the reservoir quality by closing the pore spaces . Manuscript profile

Open Access Article

9 - Reconstruction of Asmari Formation Sedimentary Environment in Asmari and Gurpi Anticlines in the oil field of Masjed Soleiman (Southwest of Iran)
Navab Varnaseri Davood Jahani Nader Kohansal Ghadimvand Mohsen Pourkermani

In this research, the process of lithological changes and diagenetic processes of Asmari formation with Oligo-Miocene age has been investigated. For this purpose, 400 samples were selected and collected from a section of the Masjid Suleiman oil field and the surface sec More

In this research, the process of lithological changes and diagenetic processes of Asmari formation with Oligo-Miocene age has been investigated. For this purpose, 400 samples were selected and collected from a section of the Masjid Suleiman oil field and the surface section of the Asmari anticline in the Dezful depression and the Gurpi anticline in the Izeh zone. Petrographic studies revealed 18 sedimentary microfacies that were deposited on a ramp-type carbonate platform. Among the significant diagenetic processes in the region are the process of micritization, bioturbation and the influence of burrowing organisms, cementation (types of cement related to marine, meteoric and burial diagenesis environments), dissolution (meteoric and burial dissolution), dolomitization (in different phases), silicification, pyritization, phosphatization, mechanical compaction, chemical compaction, fracture and porosity. Based on the identification of the sequence boundaries and following the facies depth changes, the carbonate sequence of the Asmari formation in the subsurface section and the Asmari anticline section are introduced in the form of 3 sedimentary sequences of the third order shallowing upwards, which are the former Aquitanian, the late Aquitanian and Bordigalin belong. Among the dominant porosities in the Asmari Formation, we can mention the hole, mold and fracture porosities. Manuscript profile

Open Access Article

10 - Depositional Environmental Analysis of Shally Units of Pabdeh-Gurpi Formation and Clay Minerals Effect on Wellbore Stability, Aghajari Oil Field
بهمن سلیمانی Zahra Dehghani

<!-- [if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackForm More

<span style="font-size: 10.0pt; mso-bidi-font-size: 11.0pt; font-family: 'Times New Roman',serif; mso-fareast-font-family: Calibri; mso-bidi-theme-font: major-bidi; mso-bidi-language: FA; mso-bidi-font-weight: bold;">This research is related to detect of clay minerals and geochemical changes of Pabdeh-Gurpi shale formations and their role in borehole instability in Aghajari oil field. For this purpose, these formations were investigated using NGS well log (one well ring), X-ray diffraction method (XRD) and XRF analytical method (11 samples from two wells). In the NGS log, the detected minerals are illite, montmorillonite, mixed layer, glauconite and feldspar. In the XRD method, clay minerals illite, montmorillonite, mixed layer, chlorite and kaolinite were identified in order of abundance.These minerals due to their sensitivity to react with water causes the instability of the borehole. The high ratio of Si/Al and changes of Ti and high level of Fe3+ and Mg are also a sign of the widespread presence of illite, chlorite and montmorillonite in the mentioned formations.   <span style="font-size: 10.0pt; mso-bidi-font-size: 11.0pt; font-family: 'Times New Roman',serif; mso-fareast-font-family: Calibri; mso-bidi-theme-font: major-bidi; mso-bidi-language: FA; mso-bidi-font-weight: bold;">The changes of major and trace elements compared to Al2O3 except for MnO, CaO, and P2O5 showed a positive linear relationship. The changes in the amount of Fe2O3 show the oxidizing conditions in the upper part of the base, but the reducing conditions towards the upper side. Based on the amount of iron, manganese and vanadium, the sediments were formed under conditions of reduction, non-sulphide reduction Eh and medium to low pH. Variations in Th/U ratio (1-4.5) indicate marine to transitional environments. The existence of horizons rich in organic matter (more than 2%) confirms the reduction conditions.   <span style="font-size: 10.0pt; mso-bidi-font-size: 11.0pt; font-family: 'Times New Roman',serif; mso-fareast-font-family: Calibri; mso-bidi-theme-font: major-bidi; mso-bidi-language: FA; mso-bidi-font-weight: bold;">Based on the low values of the Zr/Rb ratio, the sediments in the upper and lower parts are finer than the middle part of the grain. The relative accumulation of biogenic carbonate along with the shale is periodic and is reflected in the changes in the (Zr+Rb)/Sr ratio. Based on the Sr/Ba ratio, marine conditions prevail in the lower part and continental and metamorphic and sometimes marine conditions prevail in the upper part of the formation. Oxidation-reduction conditions were also investigated. The values of the V/(V + Ni) ratio of the semi-reduction region, the Ni/Co ratio of the reduction region and the V/Cr diagram show the almost reduction region and in some cases the oxidant conditions. Paleoclimatic conditions at the time of sedimentation based on low values of Rb/Sr ratio (less than 0.14) were completely hot and dry.   Manuscript profile

Open Access Article

11 - Stratigraphy, facies and depositional conditions of the Asmari Formation (Rupelian-Burdigalian) in the south-eastern folded Zagros, Bandarlengeh embayment (Khamir salt mountain section)
Peyman Rezaei Seyedeh Akram Jooybari Abdullah Najafi

Asmari Formation (Rupelian-Burdigalian) is one of the most well-known formations in Iran. In order to investigate the stratigraphy and sedimentary environment, a section of this formation was selected in Khamir salt mountain section in Bandarlengeh embayment. In this nu More

Asmari Formation (Rupelian-Burdigalian) is one of the most well-known formations in Iran. In order to investigate the stratigraphy and sedimentary environment, a section of this formation was selected in Khamir salt mountain section in Bandarlengeh embayment. In this number, 70 limestone microscopic thin sections and 3 marl samples (XRF) were evaluated to identify the microfacies and the sedimentation conditions.The petrographic study led to the identification of 10 microfacies belonging to the facies belts of tidal, lagoon, carbonate bar, open marine, which were deposited in the homoclinal carbonate ramp environment. The composition of marl facies oxides also indicates the presence of carbonate minerals, quartz and clay minerals, which along with field observations and alternating calcareous facies suggest that this facies was deposited in an open marine environment. Finally, it seems that the facies and fossil diversity of the Asmari Formation in the mentioned section is such that during the Aquitanian stage, this formation was located closer to the coast line and during the Rupelian and Chattian-Burdigalian times, it was located at a further distance from the coast line. Manuscript profile

List of Articles Sedimentary environment

Rimag

Links

Related Centers

Technical Support

Official pages