Improvement of Harmonic Losses and Power Quality Due to Matrix Converter Switching in Bidirectional Feeding Induction Generator Using Passive Hybrid Filter
Subject Areas : electrical and computer engineeringneda ghaderi 1 , hoda naderi 2 , Mohammad عابدینی 3 , محمدحسن مرادی 4
1 - Department of Electrical Engineering, Faculty of Engineering, Islamic Azad University, Hamedan, Iran
2 - Department of Electrical Engineering, Faculty of Engineering, Islamic Azad University, Hamedan, Iran
3 -
4 - basu uni
Keywords: Bidirectional power induction generator, passive hybrid filter, direct power control, matrix converter,
Abstract :
In two-way feeding induction generators, the stator coils connect directly to the grid, while the rotor coils connect through power electronic converters. Back-to-Back (BTB) converters are commonly used but suffer from high losses, size, and weight due to their two-stage structure and DC link capacitor. This paper proposes replacing BTB converters with matrix converters for improved efficiency and compactness. The proposed method utilizes direct power control in the matrix converter for superior tracking of reference values during changes in both reference and turbine power. However, power electronic converters can introduce harmonics and power fluctuations. To address this, a passive hybrid filter is employed at the converter's input and output. This filter reduces active and reactive power fluctuations, improves Total Harmonic Distortion (THD), and enhances overall power quality. Additionally, the matrix converter's fast dynamic response to reference power changes eliminates the need for complex current control loops, resulting in a simpler structure with minimal calculations. The paper compares the performance of the proposed method (matrix converter with filter) against scenarios with and without a filter. The results demonstrate the filter's effectiveness and superiority in achieving optimal performance.
[1] S. Sharma and V. K. Tayal, "Optimised controller design for frequency control of a wind turbine driven doubly fed induction generator," International J. of Ambient Energy, vol. 43, no. 1, pp. 7197-7206, 2022.
[2] A. Soyed, A. Kadri, O. Hasnaoui, and F. Bacha, "Direct power and voltage oriented control strategies of grid-connected wind energy conversion system based on permanent magnet synchronous generator," Cybernetics and Systems, vol. 53, no. 1, pp. 103-125, 2022.
[3] S. A. Mohd-Shafri, et al., "Optimal design of SMPMSM using genetic algorithm based on finite element model," in Proc. of the 11th Int. Conf. on Robotics, Vision, Signal Processing and Power Applications: Enhancing Research and Innovation through the 4th Industrial Revolution, pp. 721-726, Penang, Malaysia, 5-6 Apr. 2022.
[4] Z. J. Andaloussi, A. Raihani, A. Elmagri, and R. Lajouad, "Toward the optimization of a pmsg wind energy conversion system on-grid by a robust mixed controller," in Proc Int. Conf. on Energy and Green Computing., vol. 336, Article ID: 00043, 8 pp., Meknes, Morocco 9-10 Dec. 2021.
[5] M. Basic, M. Bubalo, D. Vukadinovic, and I. Grgic, "Sensorless maximum power control of a stand-alone squirrel-cage induction generator driven by a variable-speed wind turbine," J. of Electrical Engineering & Technology, vol. 16, pp. 333-347, 2021.
[6] A. Munteanu, "Fault tolerant fractional-slot concentrated-wound permanent magnet synchronous motor with redundancy for critical applications," in Proc. Int. Conf. on Electromechanical and Energy System, 5 pp., Iasi, Romania, 6-8 Oct. 2021.
[7] P. S. Flannery and G. Venkataramanan, A Grid Fault Tolerant Doubly Fed Induction Generator Wind Turbine via Series Connected Grid Side Converter, arXiv preprint arXiv:2201.08879, Jan. 2022.
[8] I. Khan, et al., "Dynamic modeling and robust controllers design for doubly fed induction generator-based wind turbines under unbalanced grid fault conditions," Energies, vol. 12, no. 3, Article ID: 0454, 2019.
[9] K. Kerrouche, A. Mezouar, and K. Belgacem, "Decoupled control of doubly fed induction generator by vector control for wind energy conversion system," Energy Procedia, vol. 42, pp. 239-248, 2013.
[10] A. Yousefi-Talouki, S. A. Gholamian, M. Yousefi-Talouki, and M. Yazdani-Asrami, "A new direct power control of doubly-fed induction generator using matrix converter," Australian J. of Electrical and Electronics Engineering, vol. 10, no. 3, pp. 307-320, Jan. 2013.
[11] I. Yaichi, A. Semmah, P. Wira, and S. M. El-Amine, "An improved direct power control based on SVM strategy of the doubly fed induction generator," in Proc. 7th Int. Renewable and Sustainable Energy Conf., 8 pp., Agadir, Morocco, 27-30 Nov. 2019.
[12] A. Yousefi-Talouki, S. Zalzar, and E. Pouresmaeil, "Direct power control of matrix converter-fed DFIG with fixed switching frequency," Sustainability, vol. 11, no. 9, Article ID: 2604, May 2019.
[13] A. Mishra and K. Chatterjee, "Harmonic analysis and attenuation using LCL-filter in doubly fed induction generator based wind conversion system using real time simulation based OPAL-RT," Alexandria Engineering J., vol. 61, no. 5, pp. 3773-3792, May 2022.
[14] C. Chhabra, et al., "Grid integration of doubly-fed induction machine using indirect field oriented control," J. of Information and Optimization Sciences, vol. 43, no. 1, pp. 219-223, 2022.
[15] A. Dida, F. Merahi, and S. Mekhilef, "New grid synchronization and power control scheme of doubly-fed induction generator based wind turbine system using fuzzy logic control," Computers & Electrical Engineering, vol. 48, Article ID: 106647, Jun. 2020.
[16] F. Mazouz, S. Belkacem, I. Colak, S. Drid, and Y. Harbouche, "Adaptive direct power control for double fed induction generator used in wind turbine," International J. of Electrical Power & Energy Systems, vol. 114, Article ID: 105395, Jan. 2020.
[17] E. Reyes, R. Pena, R. Cardenas, J. Clare, and P. Wheeler, "Control of a doubly-fed induction generator with an indirect matrix converter with changing DC voltage," in Proc. IEEE Int. Symp. on Industrial Electronics, pp. 1230-1235, Bari, Italy 4-7 Jul. 2010.
[18] C. Klumpner, I. Boldea, F. Blaabjerg, "The matrix converter: overvoltages caused by the input filter, bidirectional power flow, and control for artificial loading of induction motors," Electric Machines & Power Systems, vol. 28, no. 2, pp. 129-142, Feb. 2000.
[19] J. Tavoosi, et al., "A machine learning approach for active/reactive power control of grid-connected doubly-fed induction generators," Ain Shams Engineering J., no. 2, Article ID: 101564, Mar. 2022.
[20] P. P. Pradhan, B. Subudhi, and A. Ghosh, "A robust multiloop disturbance rejection controller for a doubly fed induction generator-based wind energy conversion system," IEEE J. of Emerging and Selected Topics in Power Electronics, vol. 10, no. 5, pp. 6266-6273, Mar. 2022.
[21] Y. Sahri, et al., "New intelligent direct power control of DFIG-based wind conversion system by using machine learning under variations of all operating and compensation modes," Energy Reports, vol. 7, pp. 6394-6412, Nov. 2021.
[22] A. Yousefi-Talouki and M. Negnevitsky, "Direct power control of matrix converter-fed doubly fed induction generator," in Proc. Australasian Universities Power Engineering Conf., 6 pp., Hobart, Australia, 29 Sept.-3 Oct. 2013.
[23] D. Li, X. Deng, C. Li, X. Zhang, and E. Fang, "Study on the space vector modulation strategy of matrix converter under abnormal input condition," Alexandria Engineering J., vol. 61, no. 6, pp. 4595-4605, Jun. 2022.
[24] M. A. Beniss, H. El Moussaoui, T. Lamhamdi, and H. El Markhi, "Performance analysis and enhancement of direct power control of DFIG based wind system," International J. of Power Electronics and Drive Systems, vol. 12, no. 2, pp. 1034-1044, Jun. 2021.
