Angle Robust Reflective Subtractive Color Filter Using Titanium Dioxide Metasurface and Aluminum Mirrors
Subject Areas : electrical and computer engineering
1 -
2 -
Keywords: Subtractive color filtermagnetic dipolepolarization-independentincidentangle-insensitive,
Abstract :
Recently, color filters have been used for high quality resolution color imaging and printing in subwavelength scale. In this paper, a reflective subtractive color filter with excellent color contrast has been demonstrated. In the proposed filter, titanium dioxide nanocuboids have been integrated with aluminum mirrors at the top and bottom of them. Due to the creation of magnetic dipole in titanium dioxide nanocuboids, a resonance occurs in the visible spectrum, which the resonance wavelength could be tuned over the whole visible range through the adjustment of the nanocuboid side size. By utilizing aluminum patches on both sides of the nanocuboids, the efficiency of more than 70% and the bandwidth of less than 35 nm have been attained. The proposed filter exhibits high incident angular tolerance such that by increasing the incident light angle from 0 to 60 degree, the resonance wavelength has very poor variation and maintains the same bandwidth and efficiency. Also, the proposed filter is polarization-independent due to its symmetric geometry. These advantages facilitate the function of the suggested filter in imaging and displays with high brightness.
[1] P. Vukusic, J. R. Sambles, and C. R. Lawrence, "Stractural colour: now you see it-now you don't," Nature, vol. 410, no. no.303, p. 36, 1 Mar. 2001.
[2] M. A. Kats, R. Blanchard, P. Genevet, and F. Capasso, "Nanometre optical coatings based on strong on strong interference effects in highly absorbing media," Nature Mat., vol. 12, no. 1, pp. 20-24, Jan. 2013.
[3] T. Xu, H. Shi, Y. K. Wu, A. F. Kaplan, J. G. Ok, and L. J. Guo, "Structural colors: frm plasmonic to carbon nanostructures," Small, vol. 7, no. 22, pp. 3128-3136, 18 Nov.2011.
[4] B. Zeng, Y. Gao, and F. J. Bartoli, "Ultrathin nanostructured metals for highly transmissive plasmonic subtractive color filters," Sci. Rep., vol. 3, Article no. 2840, 9 pp., 8 Oct. 2013.
[5] Y. Qiu, L. Zhan, X. Hu, S. Luo, and Y. Xia, "Demonstration of color filters for OLED display based on extraordinary optical transmission through periodic hole array on metallic film," Displays, vol. 32, no. 5, pp. 308–312, Dec. 2011.
[6] J. Y. Lee, K. T. Lee, S. Y. Seo, and L. J. Guo, "Decorative power generation panels creating angle insensitive transmissive colors," Sci. Rep., vol. 4, Article no. 4192, 6 pp., 28 Feb. 2014.
[7] J. S. Clausen, E. Hojlund-Nielsen, A. B. Christiansen, S. Yazdi, M. Grajower, H. Taha, U. Levy, A. Kristensen, and N. A. Mortensen, "Plasmonic metasurfaces for coloration of plastic consumer products," Nano Lett., vol. 14, no. no. 8, pp. 4499-4504, 8 Jul. 2014.
[8] V. R. Shrestha, C. S. Park, and S. S. Lee, "Enhancement of color saturation and color gamut enabled by a dual-band color filter exhibiting an adjustable spectral response," Opt. Express, vol. 22, no. 3, pp. 3691–3704, 10 Feb. 2014.
[9] Y. W. Huang, W. T. Chen, W. Y. Tsai, P. C. Wu, C. M. Wang, G. Sun, and D. P. Tsai, "Aluminum plasmonic multicolor meta-hologram," Nano Lett., vol. 15, no. no. 5, pp. 3122–3127, 6 Apr. 2015.
[10] H. Hu, et al., "Photonic anti-counterfeiting using structural colors derived from magnetic-responsive photonic crystals with double photonic bandgap hetero structures," J. Mat. Chem., vol. 22, no. 1, pp. 11048-11053, 2 Apr. 2012.
[11] Q. Chen and D. R. Cumming, "High transmission and low color cross-talk plasmonic color filters using triangular-lattice hole arrays in aluminum films," Opt. Express, vol. 18, no. 13, pp. 14056-14062, 21 Jun. 2010.
[12] G. Y. Si, E. S. P. Leong, A. J. Danner, and J. H. Teng, "Plasmonic coaxial Fabry-Pérot nanocavity color filter," Int. Soc. Opt. Photon., vol. 7757, Article no. 77573F, 5 pp. , 10 Sept. 2010.
[13] M. Aalizadeh, A. E. Serebryannikov, A. Khavasi, G. A. E. Vandenbosch, and E. Ozbay, "Toward electrically tunable, lithography-free, ultra-thin color filters covering the whole visible spectrum," Sci. Rep., vol. 8, Article no. 11316, 11 pp., 27 Jul. 2018.
[14] Z. Li, S. Butun, and K. Aydin, "Large-area, lithography-free super absorbers and color filters at visible frequencies using ultrathin metallic films," ACS Photonics, vol. 2, no. no. 2, pp. 183-188, 28 Jan. 2015.
[15] C. S. Park, V. R. Shrestha, S. S. Lee, E. S. Kim, and D. Y. Choi, "Omnidirectional color filters capitalizing on a nano-resonator of Ag-TiO 2-Ag integrated with a phase compensating dielectric overlay," Sci. Rep., vol. 5, Article no. 8467, 8 pp., 16 Feb. 2015.
[16] Z. Ren, Y. Sun, Z. Lin, C. Wang, W. Huang, and X. Zhi, "Tunable guided-mode resonance filters for multi-primary colors based on polarization rotatin," IEEE Photon. Technol. Lett., vol. 30, no. 21, pp. 1858-1861, 17 Sept. 2018.
[17] Y. Ye, R. Shao, Y. Zhou, and L. Chen, "Wide-angle transmissive filter based on a guided-mode resonant grating," Appl. Opt., vol. 51, no. 24, pp. 5785-5790, 20 Aug. 2012.
[18] M. J. Uddin, T. Khaleque, and R. Magnusson, "Guided-mode resonant polarization-controlled tunable color filters," Opt. Express, vol. 22, no. 10, pp. 12307–12315, 19 May 2014.
[19] K. Kumar, H. Duan, R. S. Hegde, S. C. Koh, J. N. Wei, and J. K. Yang, "Printing colour at the optical diffraction limit," Nature Nanotechnol., vol. 7, no. 1, pp. 557-561, Sept. 2012.
[20] T. Xu, Y. K. Wu, X. Luo, and L. J. Guo, "Plasmonic nanoresonators for high-resolution colour filtering and spectral imaging," Nature Commun., vol. 1, Article no. 59, 5 pp., 24 Aug. 2010.
[21] Y. T. Yoon, C. H. Park, S. S. Lee, Y. T. Yoon, C. H. Park, and S. S. Lee, "Highly efficient color filter incorporating a thin metal-dielectric resonant structure," Appl. Phys. Express, vol. 5, Article no. 022501, 4 pp., 8 Feb. 2012.
[22] Y. R. Wu, A. Hollowell, C. Zhang, and L. J. Guo, "Angle-insensitive structural colours based on metallic nanocavities and coloured pixels beyond the diffraction limit," Sci. Rep., vol. 3, Article no. 1194, 6 pp., 1 Feb. 2013.
[23] G. V. Naik, V. M. Shalaev, and A. Boltasseva, "Alternative plasmonic materials: beyond gold and silver," Adv. Mat., vol. 25, no. 24, pp. 3264-3294, 25 Jun. 2013.
[24] D. Lin, P. Fan, E. Hasman, and M. L. Brongersma, "Dielectric gradient metasurface optical elements," Science, vol. 345, no. 6194, pp. 298-302, 18 Jul. 2014.
[25] S. Person, M. Jain, Z. Lapin, J. J. Saenz, G. Wicks, and L. Novotny, "Demonstration of zero optical backscattering from single nanoparticles," Nano Lett., vol. 13, no. 4, pp. 1806-1809, 5 Mar. 2013.
[26] N. W. Daw, "Goldfish retina: organization for simultaneous color contrast," Science, vol. 158, no. no. 3803, pp. 942-944, 17 Nov. 1976.
[27] S. Sun, Z. Zhou, C. Zhang, Y. Gao, Z. Duan, S. Xiao, and Q. Song, "All-dielectric full-color printing with TiO2 metasurfaces," ACS Nano, vol. 11, no. 5, pp. 4445-4452, 19 Mar. 2017.
[28] S. U. Lee and B. K. Ju, "Wide-gamut plasmonic color filters using a complementary design method," Sci. Rep, vol. 7, Article no. 40649, 5 pp., 13 Jan. 2017.
[29] C. Yang, W. Shen, Y. Zhang, H. Peng, X. Zhang, and X. Liu, "Design and simulation of omnidirectional reflective color filters based on metal-dielectric-metal structure," Opt. Express, vol. 22, no. 9, pp. 11384-11391, 5 May. 2014.
