Designing a model for standardization of nanotechnology using Grounded Theory
Subject Areas :
mojtaba bahiraee
1
,
Manouchehr Manteghi
2
,
abbas khamseh
3
1 - Doctoral student of Technology Management, Faculty of Management and Economics, Science and Research Unit, Islamic Azad University, Tehran, Iran
2 - Professor of University Complex of Management and Industrial Engineering, Malik Ashtar University of Technology, Tehran
3 - Associate Professor, Department of Industrial Management, Karaj Branch, Islamic Azad University, Karaj, Iran
Keywords: StandardizationNanotechnologytechnology standardizationGrounded TheoryEmerging technology,
Abstract :
Given the ambiguity and uncertainty in the nature of nanotechnology, its commercialization requires the development of an appropriate regulatory system, and the prerequisite for implementation of such a framework is technology standardization. Therefore, the purpose of this study is to provide a model for standardization of nanotechnology and explain the theoretical theorems. This research is an applied research that has been done with a qualitative approach based on grounded theory. The statistical population of this study is experts at the macro and firm levels and purposeful sampling has been used. The collected qualitative data were analyzed using MAXQDA18 software and the final model was extracted. Based on the analyzes performed, in the axial and selective coding stages, 45 codes and 6 categories were identified, including drivers, nanotechnology standardization, mechanisms, prerequisites, surrounding conditions and barriers, and results. The resulting theory shows that standardization of nanotechnology leads to increasing market share and production volume and demand, branding, increasing quality and safety, creating wealth and economic advantage, pioneering in nanotechnology, gaining public trust, reducing risk and technology uncertainty, diffusion of innovation. To achieve these results are emphasized on strategies including, standardization diplomacy, attracting private sector participation, developing corporate standardization, improving and evaluating the national nanotechnology standardization system, enforcing some standards, export-oriented nanotechnology standardization policies, standardization in the technology life cycle, development of nanometrology laboratories, research and development in nanotechnology standardization, proper government policy, and product quality control and quality assurance.
بحیرائی، مجتبی. محمدروضه¬سرا، مریم. استانداردها و استانداردسازی، تهران، انتشارات موسسه آموزشی و تحقیقاتی صنایع دفاعی، 1395.
دانایی فرد، حسن. حیدری، محمدمهدی. آذر، عادل. قلی پور، رحمت الله. فهم خاتمه خط¬مشی¬های عمومی در ایران؛ پژوهشی بر مبنای نظریه-پردازی داده¬بنیاد. اندیشه مدیریت راهبردی، سال نهم، شماره اول- بهار و تابستان 1394، صص 85-120.
حقیقی کفاش، مهدی. حمیدی بیناباج، مژگان. کریمی¬ علویجه، محمدرضا. خلیل نژاد، شهرام. برندسازی استراتژیک. مطالعات مدیریت راهبردی. شماره 43، پاییز 1399، صص 21-43.
سیم¬خواه، مسعود. فیضی، کامران. مدیریت ریسک عرضه در زنجیره تأمین صنعت خودرو: نظریه¬ای برخاسته از داده¬ها. فصلنامه علمی- پژوهشی مطالعات مدیریت صنعتی، سال دوازدهم، شماره 33، تابستان 1393، صص 1-24.
طباطبائیان، سید حبیب الله. ناصری، رویا. فرقانی، علی. تعیین چالش¬های موجود فراروی تجاری¬سازی فناوری¬های نوظهور در ایران (مطالعه موردی فناوری نانو). فصلنامه توسعه تکنولوژی. سال پنجم، شماره یازدهم، بهار و تابستان 1386، صص 51-78.
Aithal, P. Sreeramana, and Shubhrajyotsna Aithal. "Nanotechnology innovations and commercialization–opportunities, challenges & reasons for delay." International Journal of Engineering and Manufacturing (IJEM) 6, no. 6 (2016): 15-25.
Allen, Robert H., and Ram D. Sriram. "The role of standards in innovation." Technological Forecasting and Social Change 64, no. 2-3 (2000): 171-181.
Bergek, Anna, Staffan Jacobsson, Bo Carlsson, Sven Lindmark, and Annika Rickne. "Analyzing the functional dynamics of technological innovation systems: A scheme of analysis." Research policy 37, no. 3 (2008): 407-429.
Blind, Knut, and Stephan Gauch. "Research and standardisation in nanotechnology: evidence from Germany." The journal of technology transfer 34, no. 3 (2009): 320-342.
Blind, K. "The Impact of Standardization and Standards on Innovation". Report. National Endowment for Science, (2013).
Blind, Knut. "The impact of standardisation and standards on innovation." In Handbook of innovation policy impact. Edward Elgar Publishing, 2016.
Creswell, John W. Educational research: Planning, conducting, and evaluating quantitative. Upper Saddle River, NJ: Prentice Hall, 2002.
Creswell, John W., and Dana L. Miller. "Determining validity in qualitative inquiry." Theory into practice 39, no. 3 (2000): 124-130.
Delemarle, Aurélie. "Standardization and market framing: the case of nanotechnology." In Handbook of innovation and standards. Edward Elgar Publishing, 2017.
De Vries, Henk J. Standardization: A business approach to the role of national standardization organizations. Springer Science & Business Media, 2013.
de Vries, Henk. "Standardisation-Enabler for nanotechnology innovation." (2019).Ehrnberg, Ellinor, and Staffan Jacobsson. "Indicators of discontinuous technological change: an exploratory study of two discontinuities in the machine tool industry." R&D Management 27, no. 2 (1997): 107-126.
European Commission. Rolling Plan for ICT Standardisation. European Commission, Brussels, Belgium.(2013). Featherston, Charles R., Jae-Yun Ho, Laure Brévignon-Dodin, and Eoin O'Sullivan. "Mediating and catalysing innovation: A framework for anticipating the standardisation needs of emerging technologies." Technovation 48 (2016): 25-40.
Goluchowicz, Kerstin, and Knut Blind. "Identification of future fields of standardisation: An explorative application of the Delphi methodology." Technological forecasting and social change 78, no. 9 (2011): 1526-1541.
Hawkins, Richard, and Knut Blind. "Introduction: unravelling the relationship between standards and innovation." In Handbook of Innovation and Standards. Edward Elgar Publishing, 2017.
Hesser, Wilfried, and Alex Inklaar. An introduction to standards and standardization. Beuth, 1998. Ho, Jae-Yun, and Eoin O’Sullivan. "Evolving Roles of Standards in Technological Innovation-Evidence from Photovoltaic Technology." In 35th DRUID Celebration Conference, pp. 17-19. 2013.
Ho, Jae-Yun, and Eoin O’Sullivan. "Standardisation framework to enable complex technological innovations: The case of photovoltaic technology." Journal of Engineering and Technology Management 50 (2018): 2-23.
Hou, C. Abridged Edition of International Standardization. Shanghai University of Finance and Economics Press, Shanghai.( 1996). ISO/IEC 17000, Conformity assessment -- Vocabulary and general principles.
Jiang, Hong, Shukuan Zhao, Zuopeng Justin Zhang, and Yali Yi. "Exploring the mechanism of technology standardization and innovation using the solidification theory of binary eutectic alloy." Technological Forecasting and Social Change 135 (2018): 217-228.
Jiang, Hong, Shukuan Zhao, Siwen Zhang, and Xiaobo Xu. "The adaptive mechanism between technology standardization and technology development: An empirical study." Technological Forecasting and Social Change 135 (2018): 241-248.
Kaur, Indu Pal, Vandita Kakkar, Parneet Kaur Deol, Monika Yadav, Mandeep Singh, and Ikksheta Sharma. "Issues and concerns in nanotech product development and its commercialization." Journal of Controlled Release 193 (2014): 51-62.
KET, HLG. "High-level expert group on key enabling technologies." Directorate General Enterprise and Industry, European Commission (2011). Li, C. Everyone has his shortcomings and merits. World Stand. Qual. Manag. (1994), 6, 2–4.
Li, C. Standardization and innovation of social development of the power of the source. In: China Standardization. 5. (2004), pp. 66–70.
Li, X., Han, B., Wang, Z. Study on the Relationship between Standardization and Technology Innovation. Sci. Sci. Manage. of S.& T. (2010), 11, 40–44.
Lundvall, B.A. National Systems of Innovation: Towards a Theory of Innovation and Interactive Learning. Pinter Publishers, London (1992).
Metcalfe, John S., and Ian Miles. "Standards, selection and variety: an evolutionary approach." Information Economics and Policy 6, no. 3-4 (1994): 243-268.
Framework, N. I. S. T. "Roadmap for smart grid interoperability standards." National Institute of Standards and Technology 26 (2010). N. I. S. T. Framework. "Roadmap for Smart Grid Interoperability Standards." NIST Special Publication 1108R2 (2012).
N. I. S. T. Framework. "Roadmap for Smart Grid Interoperability Standards." NIST Special Publication 1108R2 (2014).
NSTC, CoT. "NSET." NNI Research and Development Leading to a Revolution in Technology and Industry-Supplement to the President's (2011): 2010-02.
O’Sullivan, Eoin, and Laure Brévignon-Dodin. "Role of Standardisation in support of Emerging Technologies." Cambridge: Institute for Manufacturing, University of Cambridge (2012).
Roca, Jaime Bonnín, Parth Vaishnav, M. Granger Morgan, Joana Mendonça, and Erica Fuchs. "When risks cannot be seen: Regulating uncertainty in emerging technologies." Research Policy 46, no. 7 (2017): 1215-1233.
Rotolo, Daniele, Diana Hicks, and Ben R. Martin. "What is an emerging technology?." Research policy 44, no. 10 (2015): 1827-1843.
Sherif, Mostafa Hashem. "A framework for standardization in telecommunications and information technology." IEEE Communications Magazine 39, no. 4 (2001): 94-100.
Strauss, Anselm, and Juliet Corbin. Basics of qualitative research techniques. Thousand oaks, CA: Sage publications, 1998. Swann, GM Peter. "The economics of standardization: An update." Report for the UK Department of Business, Innovation and Skills (BIS) (2010).
Tassey, Gregory. "Standardization in technology-based markets." Research policy 29, no. 4-5 (2000): 587-602.
TESSY. Final Report: TESSY Achievements and Future Perspectives in Synthetic Biology. Fraunhofer Institute Systems and Innovation Research, Karls- ruhe, Germany, (2008).
Van de Ven, A. H. A community perspective on the emergence of innovations. Journal of Engineering and Technology Management, (1993),10(1-2), 23-51.
Willetts, D. "Eight Great Technologies. The Policy Exchange." London (2013).
Xie, Zongjie, Jeremy Hall, Ian P. McCarthy, Martin Skitmore, and Liyin Shen. "Standardization efforts: The relationship between knowledge dimensions, search processes and innovation outcomes." Technovation 48 (2016): 69-78.
