بررسی مبدل زمان سه فاز به پنج فاز با استفاده از اتصال ترانسفورماتور مخصوص
محورهای موضوعی : علوم مهندسی (معماری، عمران، مواد)علی بهادران 1 , سید مجید کشاورز 2
1 - دانشگاه فنی و حرفه ای پسران یاسوج
2 - دانشگاه فنی و حرفه ای یاسوج، ایران
کلید واژه: پنج فاز, چند فاز, سه فاز, ترانسفورماتور, نسبت دور,
چکیده مقاله :
اولین سیستم محرک موتور القایی پنج فاز در اواخر دهه 1970 برای کاربردهای درایو سرعت قابل تنظیم پیشنهاد شد. از آن زمان، تلاش های تحقیقاتی قابل توجهی برای شناسایی توسعه سیستم های محرک چند فازی که از نظر تجاری امکان پذیر است. از آنجا که تامین سه فاز از شبکه در دسترس است، نیاز به حذف یک سیستم تبدیل فاز استاتیک ایجاد کنید تا یک منبع چند فازی از منبع سه فاز موجود بدست آورید. بنابراین، این مقاله یک طرح اتصال ترانسفورماتور جدید برای تبدیل منبع تغذیه شبکه سه فاز به یک منبع ولتاژ ثابت و فرکانس ثابت پنج فاز ارائه میکند. اتصال ترانسفورماتور پیشنهادی پنج فاز خروجی میدهد و بنابراین، میتواند در برنامههایی که نیاز به منبع تغذیه پنج فاز دارند استفاده شود. در حال حاضر، درایو موتور پنج فاز از نظر تجاری قابل دوام است. راه حل سیستم انتقال پنج فاز را می توان بیشتر به عنوان یک راه حل کارآمد برای انتقال قدرت فله مورد بررسی قرار داد. طرح اتصال با استفاده از شبیهسازی و رویکرد تجربی برای اثبات قابلیت اجرا توضیح داده میشود. هندسه ترانسفورماتور ساخته شده در این مقاله توضیح داده شده است.
The first five-phase induction motor drive systems were proposed in the late 1970s for variable speed drive applications. Since then, considerable research efforts have been devoted to identifying the development of commercially feasible multiphase propulsion systems. Since the three-phase supply is available from the network, it is necessary to remove a static phase conversion system to obtain a multi-phase supply from the existing three-phase supply. Therefore, this paper presents a new transformer connection scheme to convert a three-phase network power supply into a five-phase constant voltage and constant frequency supply. The proposed transformer connection gives a five-phase output and therefore, can be used in applications that require a five-phase power supply. Currently, the five-phase motor drive is commercially viable. The five-phase transmission system solution can be further explored as an efficient solution for bulk power transmission. The connection scheme is explained using simulation and experimental approach to prove the feasibility. The geometry of the manufactured transformer is explained in this article.
[1] E. E. Ward and H. Harer, “Preliminary investigation of an inverter-fed 5-phase induction motor,” Proc. Inst. Elect. Eng., vol. 116, no. 6, 1969.
[2] D. Basic, J. G. Zhu, and G. Boardman, “Transient performance study of brushless doubly fed twin stator generator,” IEEE Trans. Energy Con-vers., vol. 18, no. 3, pp. 400–408, Jul. 2003.
[3] G. K. Singh, “Self excited induction generator research- a survey,” Elect. Power Syst. Res., vol. 69, pp. 107–114, 2004.
[4] O. Ojo and I. E. Davidson, “PWM-VSI inverter-assisted stand-alone dual stator winding induction generator,” IEEE Trans Ind. Appl., vol. 36, no. 6, pp. 1604–1611, Nov./Dec. 2000.
[5] G. K. Singh, K. B. Yadav, and R. P. Saini, “Modelling and analysis of multiphase (six-phase) self-excited induction generator,” in Proc.Eight Int. Conf. on Electric Machines and Systems, China, 2005, pp. 1922–1927.
[6] G. K. Singh, K. B. Yadav, and R. P. Sani, “Analysis of saturated multi- phase (six-phase) self excited induction generator,” Int. J. Emerging Elect. Power Syst., Article 5, vol. 7, no. 2, Sep. 2006.
[7] G. K. Singh, K. B. Yadav, and R. P. Sani, “Capacitive self-excitation in six-phase induction generator for small hydro power-an experimental investigation,” presented at the IEEE Conf. Power Electronics, Drives and Energy Systems for Industrial Growth—2006 (PEDES-2006) Pa- perA-20. (CD-ROM), New Delhi, India, Dec. 12–15, 2006.
[8] G. K. Singh, “Modelling and experimental analysis of a self excited six-phase induction generator for stand alone renewable energy gener- ation,” Renew. Energy, vol. 33, no. 7, pp. 1605–162, Jul. 2008.
[9] J. R. Stewart and D. D. Wilson, “High phase order transmission- a fea- sibility analysis Part-I-Steady state considerations,” IEEE Trans. Power App. Syst., vol. PAS-97, no. 6, pp. 2300–2307, Nov. 1978.
[10] J. R. Stewart and D. D. Wilson, “High phase order transmission- a feasibility analysis Part-II-Over voltages and insulation requirements,” IEEE Trans. Power App. Syst., vol. PAS-97, no. 6, pp. 2308–2317, Nov. 1978.
[11] J. R. Stewart, E. Kallaur, and J. S. Grant, “Economics of EHV high phase order transmission,” IEEE Trans. Power App. Syst., vol. PAS- 103, no. 11, pp. 3386–3392, Nov. 1984.
[12] S. N. Tewari, G. K. Singh, and A. B. Saroor, “Multiphase power transmission research-a survey,” Elect. Power Syst. Res., vol. 24, pp. 207–215, 1992.
[13] C. M. Portela and M. C. Tavares, “Six-phase transmission line-prop- agation characteristics and new three-phase representation,” IEEE Trans. Power Del., vol. 18, no. 3, pp. 1470–1483, Jul. 1993.
[14] T. L. Landers, R. J. Richeda, E. Krizanskas, J. R. Stewart, and R. A. Brown, “High phase order economics: Constructing a new transmission line,” IEEE Trans. Power Del., vol. 13, no. 4, pp. 1521–1526, Oct. 1998.
[15] J. M. Arroyo and A. J. Conejo, “Optimal response of power generators to energy, AGC, and reserve pool based markets,” IEEE Power Eng. Rev., vol. 22, no. 4, pp. 76–77, Apr. 2002.
[16] M. A. Abbas, R. Chirsten, and T. M. Jahns, “Six-phase voltage source inverter driven induction motor,” IEEE Trans. Ind. Appl., vol. IA-20, no. 5, pp. 1251–1259, Sep./Oct. 1984
[17] K. N. Pavithran, R. Parimelalagan, and M. R. Krsihnamurthy, “Studies on inverter fed five-phase induction motor drive,” IEEE Trans. Power Electron., vol. 3, no. 2, pp. 224–235, Apr. 1988.
[18] G. K. Singh, “Multi-phase induction machine drive research—a survey,” Elect. Power Syst. Res., vol. 61, pp. 139–147, 2002.
[19] M. Jones and E. Levi, “A literature survey of the state-of-the-art in multi-phase ac drives,” in Proc. Int. UPEC, Stafford, U.K., 2002, pp. 505–510.
[20] R. Bojoi, F. Farina, F. Profumo, and A. Tenconi, “Dual-three phase induction machine drives control—A survey,” Inst. Elect. Eng. Jpn. Trans. Ind. Appl., vol. 126, no. 4, pp. 420–429, 2006.
[21] E. Levi, R. Bojoi, F. Profumo, H. A. Toliyat, and S. Williamson, “Mul- tiphase induction motor drives-A technology status review,” Inst. Eng. Technol. Electr. Power Appl., vol. 1, no. 4, pp. 489–516, Jul. 2007.
[22] E. Levi, “Multiphase electric machines for variable-speed applica- tions,” IEEE Trans Ind. Electron., vol. 55, no. 5, pp. 1893–1909, May 2008.
[23] A. Iqbal and E. Levi, “Space vector PWM techniques for sinusoidal output voltage generation with a five-phase voltage source inverter,” Elect. Power Components Syst., vol. 34, no. 2, 2006.
[24] A. Iqbal and E. Levi, “Space vector modulation schemes for a five- phase voltage source inverter,” presented at the Eur. Power Electron. Conf. EPE (CD-ROM.pdf), Dresden, Germany, 2005.
[25] M. Jones, “A novel concept of a multi-phase multi-motor vector con- trolled drive system,” Ph.D. dissertation, Liverpool John Moores Univ., Liverpool, U.K., 2005.
[26] A. Iqbal, “Modelling and control of series-connected five-phase and six-phase two-motor drive,” Ph.D. dissertation, Liverpool John Moores Univ., Liverpool, U.K., 2006.
[27] H. M. Ryu, J. H. Kim, and S. K. Sul, “Analysis of multi-phase space vector pulse width modulation based on multiple d-q spaces concept,” presented at the Int. Conf. Power Electronics and Motion Control IPEMC (CD-ROM Paper 2183.pdf.), Xian, China, 2004.
[28] O. Ojo and G. Dong, “Generalized discontinuous carrier-based PWM modulation scheme for multi-phase converter-machine systems,” pre- sented at the IEEE Ind. Appl. Soc. Annu. Meet. IAS (CD-ROM Paper no. 38P3), Hong Kong, China, 2005.
[29] D. Dujic, M. Jones, and E. Levi, “Generalised space vector PWM for sinusoidal output voltage generation with multiphase voltage source inverter,” Int. J. Ind. Elect. Drives, vol. 1, no. 1, pp. 1–13, 2009.
[30] M. J. Duran, F. Salas, and M. R. Arahal, “Bifurcation analysis of five-phase induction motor drives with third harmonic injection,” IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 2006–2014, May 2008
31] M. R. Arahal and M. J. Duran, “Pi tuning of five-phase drives with third harmonic injection,” Control Eng. Practice, vol. 17, pp. 787–797, Feb. 2009.
[32] D. Dujic, M. Jones, and E. Levi, “Analysis of output current ripple rms in multiphase drives using space vector approach,” IEEE Trans. Power Electron., vol. 24, no. 8, pp. 1926–1938, Aug. 2009.
[33] M. Correa, C. R. da Silva, H. Razik, C. B. Jacobina, and E. da Silva, “Independent voltage control for series-connected six-and three-phase induction machines,” IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1286–1293, Jul./Aug. 2009.
[34] S. Choi, B. S. Lee, and P. N. Enjeti, “New 24-pulse diode rectifier sys- tems for utility interface of high power ac motor drives,” IEEE Trans. Ind. Appl., vol. 33, no. 2, pp. 531–541, Mar./Apr. 1997.
[35] V. Garg, B. Singh, and G. Bhuvaneswari, “A tapped star connected au-totransformer based 24-Pulse AC-DC converter for power quality im- provement in induction motor drives,” Int. J. Emerging Electric Power Syst. Article 2, vol. 7, no. 4, 2006.
[36] V. Garg, B. Singh, and G. Bhuvaneswari, “A 24 pulse AC-DC converter employing a pulse doubling technique for vector controlled induction motor drives,” Inst. Electron. Telecommun. Eng. J. Res., vol. 54, no. 4, pp. 314–322, 2008.
[37] B. Singh and S. Gairola, “An autotransformer based 36 pulse controlled AC-DC converter,” Inst. Electron. Telecommun. Eng. J. Res., vol. 54, no. 4, pp. 255–262, 2008.
[38] P. C. Krause, Analysis of. Electric Machinery. New York: McGraw-
Hill, 1986.