-
دسترسی آزاد مقاله
1 - SRR shape dual band CPW-fed monopole antenna for WiMAX / WLAN applications
Zahra Mansouri Ramezan Ali Sadeghzadeh Maryam Rahimi Ferdows ZarrabiCPW structure is became common structure for UWB and multi band antenna design and SRR structure is well-known kind of metamaterial that has been used in antenna and filter design for multi band application. In this paper, a SRR dual band monopole antenna with CPW-fed f چکیده کاملCPW structure is became common structure for UWB and multi band antenna design and SRR structure is well-known kind of metamaterial that has been used in antenna and filter design for multi band application. In this paper, a SRR dual band monopole antenna with CPW-fed for WLAN and WiMAX is presented. The prototype antenna is designed for wireless communication such as WLAN and WIMAX respectively at 2.4 GHz and 5 GHz. The HFSS and CST microwave studio are used to simulate the prototype antenna for two different FEM and time domain method and they have also been compared with the experimental results. The total size of the antenna is 60mm×55mm×1.6mm and it is fabricated on FR-4 low cost substrate. The antenna is connected to a 50 Ω CPW feed line. Its bandwidth is around 3% for 2.45 GHz (2.4-2.5 GHz) and 33% for 5.15GHz (4.3-6 GHz).Its limited bandwidth in 2.4 GHz frequency is benefit for power saving at indoor application. The antenna has 2-7 dBi gain in the mentioned bands with an Omni-directional pattern. The antenna experimental result shows good similarity to simulation kind for return loss and pattern. Here, the effect of parasitic SRR on current distribution has been studied in presence and absence of parasitic element. The simulation of polarization is confirmed that the antenna has linear polarization. Here comparison between antenna return losses in absence of each parasitic element is presented. پرونده مقاله -
دسترسی آزاد مقاله
2 - A Game Theory Based Dynamic Transmission Opportunity Adjustment in WLANs
Mahdieh Ghazvini Kamal Jamshidi Naser MovahediniaIEEE 802.11e is standardized to enhance real time multimedia applications’ quality of service (QoS). This standard introduces two access mechanisms called Enhanced distributed channel access (EDCA) and HCF Controlled Channel Access (HCCA) as well as four Access Categor چکیده کاملIEEE 802.11e is standardized to enhance real time multimedia applications’ quality of service (QoS). This standard introduces two access mechanisms called Enhanced distributed channel access (EDCA) and HCF Controlled Channel Access (HCCA) as well as four Access Categories (ACs) for different types of applications. Each AC has four adjustable parameters : Arbitrary Inter-Frame Space Number(AIFSN), minimum Size of Contention Window(CWmin), maximum size of Contention Window (CWmax), and TXOP_limit. A TXOP_limit (TXOP) is time interval, in which a wireless station can transmit a number of frames consecutively, without releasing the channel and any further contention with other wireless stations. TXOP improves network throughput as well as service differentiation. Proper TXOP adjustment can lead to better bandwidth utilization and QoS provisioning. This paper studies the determination of TXOP in EDCA mode of IEEE 802.11e using a game theory based approach called GDTXOP. Based on GDTXOP, each wireless node chooses its appropriate TXOP according to its queue length and media access delay. OPNET simulator simulated the proposed method and its accuracy is evaluated and verified. The results of the simulation indicate that tuning TXOP appropriately improves both channel utilization for all levels of traffic priority and fairness. This improvement does not impair the quality of high-priority traffics. The proposed approach improves channel utilization, while preserving fairness and efficiency in WLANs and minimizing selfishness behaviours of stations in a distributed environment. Simulation results show the proposed method improves fairness while not disrupting the quality of service. پرونده مقاله -
دسترسی آزاد مقاله
3 - آنتن ریز نواری چاپی باند وسیع بارگذاری شده با ساختار AMC پهنباند برای سیستمهای MIMO
حسین ملک پور شهرکی علی ابوالمعصومیدر این مقاله یک آنتن چاپی پهنباند روی سطح رسانای مغناطیسی ساختگی ارائه شده که میتوان از آن در کاربردهای بیسیم مانند WLAN، WiMAX و سیستمهای چندین ورودی و چندین خروجی (MIMO) استفاده کرد. در ساختار پیشنهادی، سطح رسانای مغناطیسی ساختگی (AMC) مسطح به عنوان صفحه زمین برای چکیده کاملدر این مقاله یک آنتن چاپی پهنباند روی سطح رسانای مغناطیسی ساختگی ارائه شده که میتوان از آن در کاربردهای بیسیم مانند WLAN، WiMAX و سیستمهای چندین ورودی و چندین خروجی (MIMO) استفاده کرد. در ساختار پیشنهادی، سطح رسانای مغناطیسی ساختگی (AMC) مسطح به عنوان صفحه زمین برای یکطرفه شدن الگوی این آنتن و افزایش پهنای باند امپدانسی استفاده شده است. طرح آنتن پیشنهادی از دو المان ریز نوار چاپی تغذیهشده به وسیله یک خط میکرواستریپی E شکل برای تزویج المانهای چاپی تشکیل گردیده است. پهنای باند آنتن ساختهشده از 94/4 تا 9/6 گیگاهرتز در محدوده موج برگشتی حدود 10- دسیبل برای قطبش خطی در باند C را شامل میشود. سلول واحد AMC لوزیشکل، پهنای باند 24/5 تا 15/7 گیگاهرتز برای فاز بازتابی 90± درجه را نشان میدهد. با اضافهکردن سطح AMC به آنتن چاپی، یک ساختار پهنباند با کوچکسازی قابل قبول و افزایش بهره تا dBi 25/7 به دست میآید. نتایج شبیهسازی خواص امپدانسی آنتن به وسیله نرمافزارهای تمام موج HFSS و CST انجام گرفته است. همچنین، آرایه دوالمانه از طرح پیشنهادی برای قطبشهای مختلف مورد بررسی قرار گرفته است. بر اساس نتایج به دست آمده، پهنای باند کاری محدوده فرکانسی 18/5 تا 81/6 گیگاهرتز را در بر میگیرد و جداکنندگی بین عناصر آرایه کمتر از dB 22- است. به همین منظور، آرایه آنتنها میتواند برای سیستمهای MIMO مورد استفاده قرار گیرد. پرونده مقاله