بررسی تاثیر بکارگیری مدیریت سطح مشترک بر کاهش دوباره کاری ها در پروژه های ساخت
محورهای موضوعی :علی هاشمی 1 , محمدحسین محمودی ساری 2
1 - کارشناسی ارشد مدیریت پروژه و ساخت، دانشگاه هنر تهران، تهران، ایران.
2 - دانشیار گروه فناوری معماری، دانشکده هنر و معماری، دانشگاه هنر تهران، تهران، ایران.
کلید واژه: مدیریت سطح مشترک_دوباره¬کاری_ پروژه¬های ساخت,
چکیده مقاله :
بیان مسئله: پروژه های حوزه ساخت اخیراً دوباره کاری ها و تغییرات ناخواسته ی قابل توجهی در مرحله اجرا تجربه کرده اند که تاثیر منفی بر عملکرد پروژه می گذارد. بررسی دوباره کاری ها در حوزه صنعت ساخت و عوامل موثر بر آنها نشان می دهد که بخش قابل توجهی از تغییرات ناخواسته و منازعات ناشی از آن در پروژه ها به دلیل عدم هماهنگی مناسب بین ذینفعان پروژه، ارتباطات ناکارآمد و یا با تاخیر بین طرف های پروژه و شکست در تشریح الزامات تحویل و به طورکلی مدیریت سطح مشترک ضعیف و عدم هماهنگی بین شرکت کنندگان مختلف پروژه می باشد که به صورت مستقیم و یا غیرمستقیم بر عملکرد پروژه تاثیر می گذارند و دوباره کاری ها را ایجاد می کنند. هدف پژوهش: هدف از این پژوهش بررسی نقش بهره گیری از مدیریت سطح مشترک بر کاهش دوباره کاری ها در پروژه های ساخت می باشد ، که برای نیل به این هدف به شناسایی علل اصلی دوباره کاری ها در این پروژه ها پرداخته شده است تا با کمک آنها بتوان تاثیر بهره گیری از مدیریت سطح مشترک بر کاهش دوباره کاری ها و درنتیجه بهبود عملکرد پروژه را مشخص کرد. روش پژوهش: در این مقاله به بررسی تاثیر بکارگیری مدیریت سطح مشترک بر کاهش دوباره کاری های پروژه های ساخت پرداخته شده است, بنابراین ابتدا با مرور مبانی نظری, فرضیه های پژوهش نوشته شد و سپس با استفاده از پرسش نامه, داده ها جمع آوری شد. جامعه آماری پژوهش شامل تمام دست اندرکاران صنعت ساخت ازجمله مجموعه کارفرمایان، مشاوران و پیمانکاران است. از این جامعه آماری, 291 نمونه آماری به روش تصادفی ساده انتخاب شدند. پژوهش حاضر کاربردی و روش پژوهش, توصیفی از نوع پیمایشی بوده که اطلاعات به روش میدانی جمع آوری و برای تحلیل داده ها از آزمون دوجمله ای استفاده شده است. نتیجه گیری: یافته های پژوهش نشان می دهد که شناسایی سطوح مشترک و مدیرت آنها در پروژه های ساخت می تواند با اثرگذاری بر مولفه های اصلی بروز دوباره کاری ها باعث کاهش اتلافات ناشی از آن در حوزه صنعت ساخت شود.
Due to the increase in the complexity and size of construction projects, the significant increase in the stakeholders involved in the project, the increase in the speed of project implementation and the risk variables caused by these factors, the management of construction projects faces significant challenges. . Also, the characteristics of construction projects, poor supervision of the project workshop, construction complexities, the existence of temporary multi-organizational nature, sub-contracts and interdisciplinary contracts in a project cause various interface issues. Also, recent construction projects in Iran have experienced significant rework and unwanted changes during the implementation phase, which has a negative impact on the project's performance. The analysis of the classification of construction rework and the factors affecting them shows that a significant part of the unwanted changes and the resulting conflicts in the projects are due to the lack of proper coordination, inefficient or delayed communication. between the project parties and the failure to explain the delivery requirements and in general poor interface management and lack of coordination between the different participants of the project in the implementation phase, which directly or indirectly affect the performance of the project and rework They create The purpose of this research is to investigate the role of using common interface management in reducing rework in construction projects, which identifies the main causes of rework in construction projects so that with their help, the effect of using interface management on the reduction of redundancies and as a result the improvement of project performance.
1- Alarcón, L. F., & Mardones, D. A. (1998, August). Improving the design-construction interface. In Proceedings of the 6th Annual Meeting of the International Group for Lean Construction (pp. 1-12).
2- Anumba, C. J., & Bouchlaghem, D. M. (2007). A review of approaches to supply chain communications: from manufacturing to construction. Journal of Information Technology in Construction (ITcon), 12(5), 73-102.
3- Anumba, C.J., Bouchlaghem, J.M. & Cutting-Decelle, A.F. (2007). “Concurrent Engineering in Construction.” Taylor & Francis, Abingdon, UK
4- Archibald, R. D. (2003). Managing high-technology programs and projects. John Wiley & Sons.
5- Ashford, J. L. (2002). The management of quality in construction. Routledge.
6- Ballard, G. (2000, July). Positive vs negative iteration in design. In Proceedings Eighth Annual Conference of the International Group for Lean Construction, IGLC-6, Brighton, UK (pp. 17-19).
7- Balouchi, M., Gholhaki, M., & Niousha, A. (2019). Reworks causes and related costs in construction: Case of Parand mass housing project in Iran. International Journal of Quality & Reliability Management, 36(8), 1392-1408.
8- Barber, P., Graves, A., Hall, M., Sheath, D., & Tomkins, C. (2000). Quality failure costs in civil engineering projects. International Journal of Quality & Reliability Management, 17(4/5), 479-492.
9- Burati Jr, J. L., Farrington, J. J., & Ledbetter, W. B. (1992). Causes of quality deviations in design and construction. Journal of construction engineering and management, 118(1), 34-49.
10- Chan, A. P., Lam, P. T., Chan, D. W., Cheung, E., & Ke, Y. (2010). Critical success factors for PPPs in infrastructure developments: Chinese perspective. Journal of construction engineering and management, 136(5), 484-494.
11- Chen, Q., Reichard, G., & Beliveau, Y. (2007). Interface management-a facilitator of lean construction and agile project management. International Group for Lean Construction, 1(1), 57-66.
12- Chen, Q., Reichard, G., & Beliveau, Y. (2009). Object model framework for interface modeling and IT-oriented interface management. Journal of construction engineering and management, 136(2), 187-198.
13- Construction Industry Institute (CII), 2014, Interface Management Implementation Guideline
14- Fritschi, N. C. (2002). Interface management for design processes: Synergy of hard and soft skills for project management (Doctoral dissertation, MS thesis, FhT Stuttgart-Hochschule für Technik, Stuttgart, Germany).
15- Hickethier, G., Tommelein, I. D., & Gehbauer, F. (2012). Reducing rework in design by comparing structural complexity using a Multi Domain Matrix. Proceedings of IGLC-20, Singapore.
16- Huang, R., Huang, C., Lin, H., and Ku, W. (2008). “Factor Analysis of Interface problems among Construction PArties – A case study of MRT.” Journal of Marine Science and Technology, Vol. 16, No. 1, pp. 52-63
17- Josephson, P. E., Frödell, M., & Polesie, P. (2009, July). Implementing standardisation in medium-sized construction firms: facilitating site managers’ feeling of freedom through a bottom-up approach. In Proceedings for the 17th Annual Conference of the International Group for Lean Construction (pp. 317-326).
18- Kapurch, S. J. (Ed.). (2010). NASA systems engineering handbook. Diane Publishing.
19- Kpamma, E. Z., & Adjei-Kumi, T. (2013, July). Construction permits and flow of projects within the Sunyani Municipality, Ghana. In annual meeting of International Group of Lean Construction (IGLC-21), Fortaleza, Brazil.
20- Lin, Y. C. (2012). Use of BIM approach to enhance construction interface management: a case study. Journal of Civil Engineering and Management, 21(2), 201-217.
21- Lin, Y. C. (2014). Construction 3D BIM-based knowledge management system: a case study. Journal of Civil Engineering and Management, 20(2), 186-200.
22- Liu, Q., Ye, G., Feng, Y., Wang, C., & Peng, Y. (2020). Case-based insights into rework costs of residential building projects in China. International journal of construction management, 20(4), 347-355.
23- Love, P. E., & Edwards, D. J. (2013). Curbing rework in offshore projects: systemic classification of risks with dialogue and narratives. Structure and Infrastructure Engineering, 9(11), 1118-1135.
24- Love, P. E., Edwards, D. J., Watson, H., & Davis, P. (2010). Rework in civil infrastructure projects: Determination of cost predictors. Journal of construction Engineering and Management, 136(3), 275-282.
25- Love, P. E., Matthews, J., Sing, M. C., Porter, S. R., & Fang, W. (2022). State of science: Why does rework occur in construction? What are its consequences? And what can be done to mitigate its occurrence?. Engineering, 18, 246-258.
26- Mahamid, I. (2022). Impact of rework on material waste in building construction projects. International Journal of Construction Management, 22(8), 1500-1507.
27- Morris, P. W. G. (1983). Programme management in a developing nation telecommunications company. International Journal of Project Management, 1(4), 204-208.
28- Mortaheb, M. M., Rahimi, M., & Zardynezhad, S. (2010, October). Interface management in mega oil refinery projects. In 6th International Project Management Conference. Tehran, Iran (pp. 26-27).
29- Nooteboom, U. (2004). Interface management improves on-time, on-budget delivery of megaprojects. Journal of Petroleum Technology, 56(08), 32-34.
30- O'Connor, J. T., & Tucker, R. L. (1986). Industrial project constructability improvement. Journal of Construction Engineering and Management, 112(1), 69-82.
31- Oyewobi, L. O., & Ogunsemi, D. R. (2010). Factors influencing reworks occurrence in construction: A study of selected building projects in Nigeria. Journal of building performance, 1(1).
32- Pan, W., Parker, D., & Pan, M. (2023). Problematic Interfaces and Prevention Strategies in Modular Construction. Journal of Management in Engineering, 39(2), 05023001.
33- Senthilkumar, V., Varghese, K., & Chandran, A. (2010). A web-based system for design interface management of construction projects. Automation in Construction, 19(2), 197-212.
34- Shen, W., Tang, W., Wang, Y., Duffield, C. F., Hui, F. K. P., & Zhang, L. (2021). Managing interfaces in large-scale projects: The roles of formal governance and partnering. Journal of Construction Engineering and Management, 147(7), 04021064.
35- Shokri, S., Ahn, S., Lee, S., Haas, C. T., & Haas, R. C. G. (2016). Current status of interface management in construction: Drivers and effects of systematic interface management. Journal of Construction Engineering and Management, 142(2), 04015070.
36- Shokri, S., Safa, M., Haas, C. T., Haas, R. C., Maloney, K., & MacGillivray, S. (2012, May). Interface management model for mega capital projects. In Construction Research Congress 2012: Construction Challenges in a Flat World (pp. 447-456).
37- Siao, F. C., & Lin, Y. C. (2012). Enhancing construction interface management using multilevel interface matrix approach. Journal of civil engineering and management, 18(1), 133-144.
38- Staats, S. A. (2014). Interface Management in multidisciplinary infrastructure project development: Diminishing integration issues across contractual boundaries in a Systems Engineering environment.
39- Trach, R., Pawluk, K., & Lendo-Siwicka, M. (2019). Causes of rework in construction projects in Ukraine. Archives of Civil Engineering, 65(3).
40- Wasfy, M. (2010). Severity and impact of rework, a case study of a residential commercial tower project in the Eastern Province-KSA. King Fahd University.
41- Wren, D. A. (1967). Interface and interorganizational coordination. Academy of Management Journal, 10(1), 69-81.
42- Ye, G., Feng, Y., Wang, C., & Peng, Y. (2020). Case-based insights into rework costs of residential building projects in China. International journal of construction management, 20(4), 347-355.