تحلیل احتمالاتی پایداری سیگنال کوچک سیستم قدرت و تنظیم هماهنگ PSSها و TCSC با در نظر گرفتن عدم قطعیت تولید مزرعه بادی
محورهای موضوعی : مهندسی برق و کامپیوتر
1 - دانشگاه تربیت مدرس
2 - دانشگاه تربیت مدرس
کلید واژه:
چکیده مقاله :
با کاهش منابع سوختهای فسیلی و افزایش آلودگی محیط زیست، استفاده از انرژیهای تجدیدپذیر روز به روز در حال افزایش است. از سوی دیگر، وقوع تجدید ساختار در صنعت برق موجب حضور هرچه بیشتر منابع تولید پراکنده در بازار برق رقابتی شده و در چنین شرایطی، فضا برای حضور مزارع بادی و تأمین بخشی از توان سیستم کاملاً مساعد میباشد. اما توان تولیدی مزرعه بادی وابسته به سرعت باد بوده و این عدم قطعیت در تولید موجب افزایش نگرانیها در مورد اتصال این منابع به سیستم و بهرهبرداری از آنها شده است. از این رو در این مقاله روشی احتمالاتی برای مطالعه پایداری سیگنال کوچک سیستم با در نظر گرفتن عدم قطعیت تولید مزارع بادی با استفاده از روش PCM ارائه شده است. روش PCM بر پایه چندجملهایهای متعامد استوار میباشد که یک مدل خطی از خروجی مطلوب فراهم میآورد. با تغییر مداوم نقطه کار ناشی از تغییرات توان خروجی مزرعه بادی، پارامترهای تجهیزات کنترلی باید دوباره و بر اساس شرایط بهرهبرداری جدید تنظیم گردند. بدین منظور از الگوریتم ژنتیک و مدلهای تقریبی به دست آمده برای توابع چگالی احتمال مقادیر ویژه بحرانی از روش PCM استفاده شده است. به منظور اعتبارسنجی روش پیشنهادی، از دو سیستم 10 ماشین و 16 ماشین IEEE استفاده شده است.
With the decreasing of the fossil fuels and increasing of the environmental pollution, using of renewable energy resources is growing rapidly. On the other hand, the restructured electricity industry causes to cooperation of the distributed generation resources in the competitive electricity market. In such situation, the presence of the wind farms in the power system in order to provide the system loads is quite favorable. However, wind farm generation depends on the wind speed and the uncertainty in the generation cause to some concerns about the connection and operation of the power system. So, in this paper, a probabilistic approach for small signal stability analysis with considering the wind farm generation uncertainty based on PCM method is proposed. The PCM method is based on the orthogonal polynomials which provide a linear model for desired output. The continuous changes of the wind farm generation level cause to variation on the operating point that the control equipment parameters should be adjusted based on the new operation conditions. Therefore, genetic algorithm and the approximate models which are obtained from the PCM method are used. In order to validate the proposed method, the IEEE 10-machine and IEEE 16-machine test system are used.
