Fabric Defect Identification based on KNN and PCA Algorithms
الموضوعات : Pattern Recognition
Zahra Nouri
1
,
Farahnaz Mohanna
2
,
Mina Boluki
3
1 - Department of Telecommunication Engineering, Electrical and Computer Engineering Faculty, University of Sistan and Baluchestan, Zahedan, Iran
2 - Dept. of Communication University of Sistan and Baluchestan Zahedan, Iran
3 - Dept. of Communication University of Sistan and Baluchestan Zahedan, Iran
الکلمات المفتاحية: Fabric Defect Identification, Feature Extraction, KNN Classifier, PCA Algorithm,
ملخص المقالة :
In this study, the k-nearest neighbor classifier is used for fabric defect identification. First, the fabric image grey-level directional co-occurrence matrix (GLCM) is computed in two directions of , and . Next, 6 intensities features of the image are calculated from the GLCM. Second, the fabric image grey levels minimum, maximum, median, and mean are also computed. Third, these 16 features are gathered in a vector as the input image feature vector. Fourth, the principal component analysis algorithm is used to decrease the fabric image feature vector size. Fifth, the k-nearest neighbor classifier is used to cluster the reduced features. In this stage, the input image is classified as defect or free defect according to the training data. In following to locate the defects, defect patches are segmented from the fabric image with the defect. Then, the features of defective patches are calculated, decreased using the principal component analysis algorithm, and classified by the k-nearest neighbor classifier. Finally, each defect class is obtained and the defect positions are illustrated by morphology. The performance of the proposed method is measured in the TILDA database images. The results of evaluation show the mean average accuracy of 95.65% for fabric defect identification in the database.
References
[1] S. Mei, Y. Wang, and G. Wen, “Automated fabric defect detection with a multi-scale convolutional de-noising auto-encoder network model,” Sensors, Vol. 18, No. 4, 2018.
[2] J. F. Jing, H. Ma, and H. H. Zhang, “Automatic fabric defect detection using a deep convolutional neural network,” Coloration Technology, Vol. 135, No. 3, 2019, pp. 213–223.
[3] P. Guo, Y. Lin, Y. Wu, R. Hugh Gang, and Y. Li, “Intelligent quality control of surface defects in fabrics: A comprehensive research progress,” IEEE Access, Vol. 12, 2024, pp. 63777 - 63808.
[4] W. Wei, D. Deng, L Zeng, and C. Zhang, “Real-time implementation of fabric defect detection based on variational automatic encoder with structure similarity,” Real-Time Image Processing, Vol. 18, No. 3, 2021, pp. 807-823.
[5] L. Shao, E. Zhang, Q. Ma, and M. Lie, “Pixel-wise semi-supervised fabric detection method combined with multitask mean teacher,” IEEE Transactions on Instrumentation and Measurement, Vol. 71, 2506011, 2022.
[6] D. Mo, W. K. Wong, Z. Lai, and J. Zhou, “Weighted double-low-rank decomposition with application to fabric defect detection,” IEEE Transactions on Automation Science and Engineering, Vol. 18, No.3, 2021, pp. 1170-1190.
[7] Y. Li, H. Luo, M. Yu, G. Jiang, and H. Cong, “Fabric defect detection algorithm using RDPSO-based optimal Gabor filter,” The Journal of The Textile Institute, Vol. 110, No. 4, 2019, pp. 487–495.
[8] W. Wang, N. Deng, and B. Xin, “Sequential detection of image defects for patterned fabrics,” IEEE Access, Vol. 8, 2020, pp. 174751-174762.
[9] Q. Liu, C. Wang, Y. Li, M. Gao, and J. Li, “A fabric defect detection method based on deep learning,” IEEE Access, Vol. 10, 2022, pp. 4284-4296.
[10] Z. Zhu, G. Han, G. Jia, and L. Shu, “Modified DenseNet for automatic fabric defect detection with edge computing for minimizing latency,” IEEE Internet of Things Journal, Vol. 7, No. 10, 2020, pp. 9623-9636.
[11] H. Xie, Y. Zhang, and Z. Wu, “Fabric defect detection method combing image pyramid and direction template,” IEEE Access, Vol. 7, 2019, pp. 182320-182334.
[12] M. M. Khodier, S. M. Ahmed, and M. Sharaf Sayed, “Complex pattern jacquard fabrics defect detection using convolutional neural networks and multispectral imaging,” IEEE Access, Vol. 10, 2022, pp. 10653-10660.
[13] l. Song, r. Li, and S. Chen, “Fabric defect detection based on membership degree of regions, IEEE Access, Vol. 8, 2020, pp. 48752-48760.
[14] Y. Huang, J. Jing, and Z. Wang, “Fabric defect segmentation method based on deep learning,” IEEE Transactions on Instrumentation and Measurement, Vol. 70, 2021.
[15] X. Kang, and F. Zhang, “A universal and adaptive fabric defect detection algorithm based on sparse dictionary learning,” IEEE Access, Vol. 8, 2020, pp. 221808 - 221830.
[16] H. Lv, H. Zhang, M. Wang, J. Xu, X. Li, and C. Liu, “Hyperspectral imaging based nonwoven fabric-defect-detection method using LL-YOLOv5,” IEEE Access, Vol. 12, 2024, pp. 41988-41998.
[17] C. Zhang, Y. Qi, and Y. Wang, “ Learning the color space for effective fabric defect detection,” IEEE Transactions on Emerging Topics in Computational Intelligence, Vol. 8, No. 1, 2024, pp. 981-991.
[18] S. Tian, P. Huang, H. Ma, J. Wang, X. Zhou, S. Zhang, J. Zhou, R. Huang, and Y. Li, “CASDD: Automatic surface defect detection using a complementary adversarial network,” IEEE Sensors Journal, Vol. 22, No. 20, 2024, pp. 19583-19595.
[19] X. Luo, Q. Ni, R. Tao, and Y. Shi, “A lightweight detector based on attention mechanism for fabric defect detection,” IEEE Access, Vol. 11, 2023, pp. 33554-33569.
[20] Z. Xiang, Y. Shen, M. Ma, and M. Qian, “HookNet: Efficient multiscale context aggregation for high-accuracy detection of fabric,” IEEE Transactions on Instrumentation and Measurement, Vol. 72, 2023.
[21] Y. Zhao, Q. Liu, H. Su, J. Zhang, H. Ma, W. Zou, and S. Liu, “Attention-based multiscale feature fusion for efficient surface defect detection,” IEEE Transactions on Instrumentation and Measurement, Vol. 73, 2024.
[22] H. Chugh, M. Garg, S. Gupta, and S. Sharma, “Plant leaf image identification with texture features using microstructure descriptor,” in the 10th International Conference on Reliability, Infocom Technologies, and Optimization (Trend and Future Decisions), 2022. DOI:10.1109/ICRITO56286.2022.9965064
[23] Z. Xia, Y. Chen, and C. Xu, “Multiview PCA: a methodology of feature extraction and dimension reduction for high-order data,” IEEE Transaction on Cybernetics, Vol. 52, No. 10, 2022, pp. 11068-11080.
[24] F. Nie, Z. Li, R. Wang, and X. Li, “An effective and efficient algorithm for k-means clustering with new formulation,” IEEE Transactions on Knowledge and Data Engineering, Vol. 35, No. 4, 2023, pp. 3433-3443.
[25] B. Yang, Z. Jia, J. Yang, and N. K. Kasabov, “Video snow removal based on self-adaptation snow detection and patch-based Gaussian mixture model,” IEEE Access, Vol. 8, 2020, pp. 60188-160201.
[26] I. Misra, M. Kumar Rahil, S. Manthira Moorthi, and Debajyoti Dhar, “Direct feature extraction and image co-registration of morphological structure from Bayer pattern raw planetary images,” Expert Systems and Application, Vol. 238, 2024.
[27] M. Boluki, and F. Mohanna, “Inspection of textile fabrics based on the optimal Gabor filter,” Signal, Image, and Video Processing, Vol. 15, 2021, pp. 1617-1625.
